Atec Yokogawa-TA320 - Manual (Page 5)

13
TIME INTER
V
AL ANAL
YZER & UNIVERSAL COUNTERS
RECORDERS
WAVEFORM
MEASURING
INSTRUMENTS
DIGITAL
MEASURING
INSTRUMENTS
INDEX
TIME INTERVAL ANALYZER & UNIVERSAL COUNTERS
TA320
Application Software Specifications
● Optional Disk Analysis Software for the TA320
Readable data: Binary type data measured with the TA320(WVF), Binary data
saved using this software
Data acquisition: Via floppy disk or communications through GP-IB interface
Display of analysis results: Histogram display (graph display), vertical scale: log or lin-
ear, Delta average table, Jitter value (standard deviation) table,
Judgment line display, and Independent/overlapping display for
Pit/Land measured values
Analysis range: Start cycle is limited to 1 to 3T.
End cycle ranges from 1 to 16T.
Save/load functions: Analysis data and the software settings can be saved or loaded.
Saving or loading of average values only is also available.
Database function: Data for each Pit/Land and the title to be given to the data can be
controlled as a bundle.
Printing function: Histograms, graphs, and tables can be printed out.
The printing direction can be specified.
Judgment function: This function sets the median and allowable range for a delta av-
erage and the criterion for standard deviation.
With the judgment function, the judgment line is displayed on
the graph and the data exceeding the criterion (NG) are marked
in a different color.
Comments: Comments can be attached to the analysis result.
Personal computer: Those running Windows 3.1, Windows 95, or Windows NT
workstation
GP-IB board: Those made by NATIONAL INSTRUMENTS.
■ BLOCK DIAGRAM OF THE TA320