Atec Tektronix-TSG90 - Manual (Page 3)

Specifications
1–2 TSG 90 PATHFINDER Service Manual
Performance Conditions
The Performance Requirements are valid within the environmental limits shown
in Table 1–7 if the instrument is calibrated in an ambient temperature of 23
°
C,
after a warm-up time of 20 minutes.
Safety Standards
The following safety standards apply to the TSG 90:
H ANSI/ISA-S82.01
H IEC 348
H CAN/CSA C22.2 No. 231
H UL 1244
NOTE. Shielded cables were used in the certification of this instrument;
therefore, shielded cables are recommended to be used when operating. (EC 92)