Atec Tektronix-TSG90 - Manual (Page 2)

TSG 90 PATHFINDER Service Manual 1–1
Specifications
Introduction
The material in this section is organized into two main groupings: the specifica-
tion tables and the supporting figures. The specification tables include:
H NTSC general signal characteristics and test signal specifications.
H Signal level specifications.
H Power supply, physical, and environmental specifications.
The supporting figures (waveform diagrams and related data) follow the specifi-
cation tables.
Reference Documentation
The following documents were used as references in the preparation of this spec-
ification:
Product Classification Environmental Test Summary, 13 June 1977;
Tektronix Standard 062-2853-00
Electromagnetic Compatibility Environmental Test, 31 March 1977;
Tektronix Standard 062-2866-00
Recommendations and reports of the CCIR, 1978; Transmission of Sound
Broadcasting and Television Signals Over Long Distances (CMTT)
IEEE Standard Dictionary of Electrical Terms, Second Edition (1977); IEEE
Standard 100-1977
Safety Standard for Electrical and Electronic Test, Measuring Controlling
and Related Equipment, February 1988; ANSI/ISA-S82.01
International Electrotechnical Commission Standard “Safety Requirements
for Electronic Measuring Apparatus;” IEC 348
Canadian Standards Association Electrical Standard for Electrical and
Electronic Measuring and Testing Equipment; CAN/CSA C22.2 No. 231
Standard for Electrical and Electronic Measuring and Testing Equipment,
Second Edition, July 21, 1980