Atec Tektronix_AFG3000_Series_Arbitrary-Function_Generators - Manual (Page 2)

Datasheet
Characteristics
AFG3000 Series Characteristics
Characteristic AFG3011 AFG3021B
AFG3022B AFG3101
AFG3102 AFG3251
AFG3252
Channels 1 1 / 2 1 / 2 1 / 2
Waveforms Sine, Square, Pulse, Ramp, Triangle, Sin(x)/x, Exponential Rise and Decay, Gaussian, Lorentz, Haversine, DC, Noise
Sine Wave 1 µHz to 10 MHz 1 µHz to 25 MHz 1 µHz to 100 MHz 1 µHz to 240 MHz
Sine wave in Burst Mode 1 µHz to 5 MHz 1 µHz to 12.5 MHz 1 µHz to 50 MHz 1 µHz to 120 MHz
Effective maximum frequency
out
10 MHz 25 MHz 100 MHz 240 MHz
Amplitude Flatness (1 V
p-p
)
<5 MHz ±0.15 dB ±0.15 dB ±0.15 dB ±0.15 dB
5 MHz to 10 MHz ±0.3 dB
— — —
5 MHz to 20 MHz
—
±0.3 dB ±0.3 dB ±0.3 dB
20 MHz to 25 MHz — ±0.5 dB ±0.3 dB ±0.3 dB
25 MHz to 100 MHz
— —
±0.5 dB ±0.5 dB
100 MHz to 200 MHz
— — —
±1.0 dB
200 MHz to 240 MHz — — — ±2.0 dB
Harmonic Distortion (1 V
p-p
)
10 Hz to 20 kHz < -60 dBc < -70 dBc < -60 dBc < -60 dBc
20 kHz to 1 MHz < -55 dBc < -60 dBc < -60 dBc < -60 dBc
1 MHz to 5 MHz < -45 dBc < -50 dBc < -50 dBc < -50 dBc
5 MHz to 10 MHz < -45 dBc < -50 dBc < -37 dBc < -37 dBc
10 MHz to 25 MHz
—
< -40 dBc < -37 dBc < -37 dBc
>25 MHz — — < -37 dBc < -30 dBc
THD <0.2% (10 Hz – 20 kHz, 1 V
p-p
)
Spurious (1 V
p-p
)
10 Hz to 1 MHz < -60 dBc < -60 dBc < -60 dBc < -50 dBc
1 MHz to 10 MHz < -50 dBc
— — —
1 MHz to 25 MHz
—
< -50 dBc < -50 dBc < -47 dBc
>25 MHz
— —
< -50 dBc + 6 dBc/octave < -47 dBc + 6 dBc/octave
Phase noise, typical < -110 dBc/Hz at 10 MHz,
10 kHz offset, 1 V
p-p
< -110 dBc/Hz at 20 MHz, 10 kHz offset, 1 V
p-p
Residual clock noise -63 dBm -63 dBm -57 dBm -57 dBm
Square Wave 1 µHz to 5 MHz 1 µHz to 12.5 MHz 1 µHz to 50 MHz 1 µHz to 120 MHz
Rise/Fall time ≤50 ns ≤18 ns ≤5 ns ≤2.5 ns
Jitter (RMS), typical 500 ps 500 ps 200 ps 100 ps
Ramp Wave 1 µHz to 100 kHz 1 µHz to 250 kHz 1 µHz to 1 MHz 1 µHz to 2.4 MHz
Linearity, typical ≤0.2% of peak output ≤0.1% of peak output ≤0.15% of peak output ≤0.2% of peak output
Symmetry 0.0% to 100.0% 0.0% to 100.0%
Pulse Wave 1 mHz to 5 MHz 1 mHz to 12.5 MHz 1 mHz to 50 MHz 1 mHz to 120 MHz
Pulse width 80.00 ns to 999.99 s 30.00 ns to 999.99 s 8.00 ns to 999.99 s 4.00 ns to 999.99 s
Resolution 10 ps or 5 digits
Pulse duty 0.001% to 99.999% (Limitations of pulse width apply)
Edge transition time 50 ns to 625 s 18 ns to 625 s 5 ns to 625 s 2.5 ns to 625 s
Resolution 10 ps or 4 digits 10 ps or 4 digits
Lead delay
Range (Continuous Mode): 0 ps to Period
(Triggered/Gated Burst Mode): 0 ps to Period – [Pulse Width + 0.8 * (Leading Edge Time + Trailing Edge Time)]
Resolution 10 ps or 8 digits
Overshoot, typical <5%
Jitter (RMS), typical 500 ps 500 ps 200 ps 100 ps
2 www.tektronix.com