Atec Tektronix-TDS500D-700D Series - Manual (Page 3)

COMPLEMENTARY
MEASUREMENT
ACCESSORIES
Tektronix provides a wide
range of measurement acces-
sories optimized for the TDS
family. These accessories are
designed to operate via the
TEKPROBE
® interface, which
provides power and auto-
matic scaling, to complete the
DPO measurement solutions.
Active Probes such as the P6217
and P6245 active probes were
designed specifically for the
DPO products. For example,
the P6217 is capable of
achieving the full 2 GHz
bandwidth on a TDS 794D,
while providing low loading.
The P6339A Buffered Passive
Probe is designed to provide
high impedance 500 MHz
general purpose probing
capabilities for the TDS 794D.
Optical-to-Electrical Converters
(P6701B, P6703B) allow conve-
nient analysis of optical
transmission signals with the
oscilloscope to standard
wavelengths for SONET/SDH
and Fibre Channel.
High-bandwidth Differential
Probes (P6246, P6247) enable
high bandwidth (up to 1 GHz)
differential measurements
while maintaining high com-
mon-mode rejection.
Current Probes such as the
TCP202 and High-Voltage Dif-
ferential Probes such as the
P5205 and P5210 allow safe,
high-power measurements.
Direct Probe Readouts use
information from the probes
to display measurements in
units of Amps, Volts, and
Watts.
SOPHISTICATED DOCUMENTATION
Save screen displays in a
number of standard desktop
publishing formats to the
internal 3.5 in. DOS-compati-
ble floppy disk drive. Trans-
fer the disk to a PC for import
into word processing applica-
tions. Make hardcopies
directly to monochrome or
color printers and plotters
connected to the computer
network (LAN), GPIB, RS-
232, or Centronics ports, or
acquire waveforms, screen
displays, and scope settings
using Tektronix WaveStar
™
software running on a PC
interfaced to the GPIB port.
page 3
The horizontal histogram of the selected region of the
waveform shows the character of a metastable flip-flop
output.
A SONET/SDH (OC-3/STM-1) signal is compared with
the standard mask, showing a compliant waveform.
TDS 500D/700D Series Timebase System
TDS 794D TDS 784D/TDS 580D TDS 754D / TDS 724D /
TDS 540D/TDS 520D
Time Bases Main, delayed Main, delayed Main, delayed
Time Base Range 200 ps to 10 s/div 200 ps to 10 s/div 500 ps to 10 s/div
Time Base Accuracy ±25 ppm ±25 ppm ±25 ppm
(over any interval ≥ 1 ms) (over any interval ≥ 1 ms) (over any interval ≥ 1 ms)
Pre-trigger Position 0% to 100% 0% to 100% 0% to 100%
of any record of any record of any record
Delay Between Channels
≤
50 ps (any 2 channels with equal V/div and coupling)