Atec Tektronix-P5205-P5210 - Manual (Page 2)

High Voltage Differential Probes
P5200 • P5205 • P5210
High Voltage Differential Probes • www.tektronix.com/accessories 2
overrange visual and audible indicator
which warns the user when they are
exceeding the linear range of the probe. It
can be used with Tektronix TEKPROBE ™
interface oscilloscopes directly or with any
oscilloscope with the use of the 1103
TEKPROBE ® Power Supply.
The P5205 is a 100 MHz Active Differential
Probe capable of measuring fast rise times
of signals in floating circuits. This 1,300 V
differential probe can measure safely
voltages in IGBT circuits such as motor
drives or power converters. It is specifically
designed to operate on Tektronix oscillo-
scopes with TEKPROBE interface.
Characteristics
Specifications P5200 P5205 P5210
Bandwidth (–3 dB) 25 MHz 100 MHz 50 MHz
Differential Mode Voltage 1000 V CAT II 1000 V CAT II 4400 V
(RMS or DC) (between positive
and negative input leads)
Differential Mode Voltage 1300 V 1300 V 5600 V
(Peak) *1 (between positive
and negative input leads)
Common Mode Voltage (RMS or DC 1000 V CAT II 1000 V CAT II 2200 V CAT II
+ Pk AC) (between positive lead and 600 V CAT III 600 V CAT III 1000 V CAT III
ground or negative lead and ground)
Attenuation (switchable) 50X/500X 50X/500X 100X/1000X
CMRR at 60 Hz/1 MHz (typical) 80 dB/50 dB 80 dB/50 dB 80 dB/50 dB
Input R (each input) 4 M Ω 4 M Ω 8 M Ω
Input C (each input) 7 pF 7 pF 7 pF
Power Source AC wall adapter TEKPROBE Power Supply TEKPROBE Power Supply
Safety (all) UL3111-1/CSA1010.1/CSA1010.2.031/IEC61010-2-031/EN61010-2-031
Compatible Products All *3 TDS400/500/600/700/ TDS400/500/600/700/
TDS3000B/5000B/6000B *2 /7000B *2 / TDS3000B/5000B/6000B *2 /7000B *2 /
CSA7000B *2 and 11000 Series CSA7000B *2 and 11000 Series
*1 The RMS value of the waveform shall not exceed the Common Mode Voltage (RMS) for either lead.
*2 TDS7154B, TDS7254B, TDS7404B, TDS6404, TDS6604, CSA7154, and CSA7404B require a TCA-1MEG Buffer Amplifier.
*3 WARNING: For safe operation, do not use the P5200 High Voltage Differential Probe with oscilloscopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 series oscilloscopes
and THS700 series oscilloscopes. The P5200 High Voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.