Atec Tektronix-P5205-P5210 - Manual

Features & Benefits
Bandwidths Up to 100 MHz
Up to 5,600 V Differential
(DC + pk AC)
Up to 2,200 V Common (RMS)
Overrange Indicator
Safety Certified
Switchable Attenuation
Switchable Bandwidth Limit
Applications
Floating Measurements
Switching Power Supply Design
Motor Drive Design
Electronic Ballast Design
CRT Display Design
Power Converter Design
and Service
Power Device Evaluation
High Voltage Differential Probes
P5200 • P5205 • P5210
The P5200 can be used with any oscillo-
scope and enables users to safely make
measurements of floating circuits with their
oscilloscope grounded. The P5200 Active
Differential Probe converts floating signals
to low-voltage ground referenced signals
that can be displayed safely and easily on
any ground referenced oscilloscope.
WARNING: For safe operation, do not use
the P5200 High Voltage Differential Probe
with oscilloscopes that have floating inputs
(isolated inputs), such as the Tektronix
TPS2000 Series oscilloscopes and
THS700 Series oscilloscopes. The P5200
High Voltage Differential Probe requires
an oscilloscope or other measurement
instrument with grounded inputs.
The P5210 is a Differential Probe that is
capable of measuring floating voltages up
to 5,600 V (DC +pk AC) safely and has
a bandwidth up to 50 MHz. It is supplied
with two sizes of hook tips and has an
P5205.
P5200.
P5210.