Atec SP-Scientific-ThermoJet-ES - Manual (Page 2)

ThermoJet
es
Specifications
1, 2
Virtis Genevac Hull FTS Systems National-Hotpack
Temperature
Maximum Low -80°C
Maximum High Standard +225°C / High Temp +350°C
Accuracy 1°C - Factory calibrated with NIST traceable device
Setability 0.1°C
Indication/Resolution 0.1°C
Stability
±0.5°C at discharge nozzle
Sensors: Special limits of error type-T thermocouples
Calibration Software controlled
Max. Transition Rates +125°C to -55°C in <10s / -55°C to +125°C in <10s
+200°C to -65°C in <15s / -80°C to +200°C in <15s
Stabilization Rate 3 +125°C to -55°C in <12s
-55°C to +125°C in <4s
Air Filtering/Drying
Coalescent Water, Oil, and Particle Filtering
Heatless
Regenerative
-85°C dew point
Air Flow Specifications
Input 25 SCFM @ 80-125 psig, dew point 10°C
(11.8 l/s @ 5.5 - 8.6 bar)
Output 5-20 SCFM (2.3 - 9.4 l/s)
Factory calibrated with NIST traceable device
Setability 1 SCFM (0.4 l/s)
Physical Characteristics
Footprint 21” wide x 27” deep (54 cm x 69 cm)
Arm Reach 56” radius (140 cm) max.
Rotation 350°
Work Surface Height 38” (100 cm)
Weight 425 lbs (193 kg)
Mobility 4 full swivel, lockable casters
DB Rating 4 65 dB(A)
System Controller Features
Type Microprocessor PLC-based PID
Program Save and load 48 programs of 8 segments each
Safeties Low flow, over temp, EMo interlock
Status Indication Air input, air temp, air/DUT control,
OK, run/idle, purge, defrost
Available Limits Max. ramp rate, min./max. air temperatures
Ramp Rates 1°C/min. incremental up to 999°C
Remote Information IEEE, RS232 Communication
System Requirements
Temperature +12°C to +25°C
Humidity 0% to 65% RH
Electrical 208V-230V/60Hz, 200V/50Hz @ 1Ph 30A
220V-230V/50Hz @ 1Ph 30A
General Accessories
Model Description
THJ-AP Auxiliary Purge, Adjustable Flow
THJ-NAA Nozzle Adaptor Accessory
THJ-TC1 Thermocouple Kit
Thermal Caps
Model Description
SH25T1 Transparent 2.5” ID x 2” deep
SH35T1 Transparent 3.5” ID x 2” deep
SH45T1 Transparent 4.5” ID x 2” deep
SH55T1 Transparent 5.5” ID x 2” deep
SH65T1 Transparent 6.5” ID x 2” deep
European Union EMC &
Safety Compliance Declaration
The European Conformity (CE) marking
symbolizes conformity of SP Scientific products with
the applicable 2010 EN and CE Standards. For more
information about CE compliance, please contact
SP Scientific at 800-431-8232 x2372.
Additional Features:
• Save & trend data with our USB stick data
logging feature
• Enhanced nozzle design allows for device
testing at greater pressures. Devices may
operate at pressures up to 70 PSI
• Effortlessly adjust the height of the arm with
a click of a button. Our improved Motorized
Arm allows for precise adjustment from the
touch screen
• Save on utility costs with the updated energy-
efficient software
• Utilizes CFC and HCFC free refrigerants
• External thermocouple with auto-tuning
for convenient temperature control and
monitoring of DUT
• LabView drivers and control application
available upon request
• Command sets compatible with similar
systems in market
NOTES:
1. Specifications based on 230V, 60 Hz at 15 SCFM, ambient
23°C, 50% humidity.
2. System may be used with lower pressure at reduced
specifications.
3. Clock started when temperature reached setpoint.
4. Operating at low air flow.
SP Scientific, “Making Time for Science” and the SP Scientific logo are trademarks of SP Industries Inc.