Atec Tinius-Olsen-H1KS User Manual

Page 5

background image

5

Fig 24. A 3 point bend test being

performed with model HF72 flexural

jig on plastic sample

Fig 22. Testing strength of crimped

connections using HT20 grips

Fig 30. Testing the puncture

resistance of work gloves

Fig 31. Testing the extraction forces

of new material for wine bottle corks

Fig 29. Tinius Olsen high travel

extensometer, model 100RC

Fig 32. Tear test on rubber specimens

Fig 28. Testing webbing material

using S453 grips

Fig 26. Model H10kS shown with an

environmental chamber for testing at

elevated or reduced temperatures; note

the use of a laser extensometer that

can be used with the chamber to

determine the elongation of the sample

Fig 27. Compression test on crash

helmet

Fig 23. Dumbbell sample of sheet

metal being tested with HW21 grips

Fig 25. Reinforced plastic dumbbell

samples