Temptronic, Options and accessories, Custom thermal test enclosure – Atec Temptronic-TP04100A User Manual
Page 2
an inTEST Company
TEMPTRONIC
4 Commercial Street
Sharon, MA 02067 USA
Tel: (781) 688-2300
Fax: (781) 688-2301
www.temptronic.com
Options and Accessories
The Thermal Wand may be operated in-hand or secured in the optional
Thermal Wand Stand Assembly
for added stability and
hands-free operation. Mounted directly to the TP04100A controller cabinet, the Stand Assembly rotates over 340°, and
expands and locks for stable, proper coupling of the Thermal Wand to the DUT. The optional Benchmount Stand Assembly
attaches to the bench to hold the Thermal Wand Stand Assembly. The Thermal Wand may then be used while secured in
the stand for stability during test while located conveniently at the bench.
To protect from moisture condensation and frost at the DUT site, the optional single-wall glass
Thermal Cap
may be attached to
the Thermal Wand with the shrouds. The Thermal Cap is approximately 9.9 cm (3.9 inches) ID and includes a metal guard.
Additional conductive and non-conductive sheets and shrouds in various sizes and shapes are also optional.
For frost-free thermal testing of ICs, hybrids, modules and small subassemblies in a precisely controlled thermal environment,
ThermoFixture
®
and
Custom Thermal Test Enclosures
are available. ThermoFixture enclosures include the complete ATE tester
interface and DUT thermal control for moisture-free testing at low temperatures even over longer test periods.
These specifications are valid for the standard product and are subject to change without notice. Applications requiring modification of electrical, thermal
or mechanical characteristics should be discussed with the factory for possible accommodation at additional cost. Printed in U.S.A. ThermoStream
®
and
ThermoFixture
®
are registered trademarks of Temptronic Corporation. Windows
®
, Windows 95
®
and Windows NT
®
are registered trademarks of Microsoft
Corporation
®
. LABVIEW
®
is a registered trademark of National Instruments, Inc. 3/2005 Part No. SL10260R/C
Custom Thermal Test Enclosure
ISO 9001-2000 Certified