Atec Teseq-ProfLine_2103 - Manual (Page 3)

A d v a n c e d Te s t S o l u t i o n s f o r E M C
DAQ card and cable
Interface
PCI
Size Standard height
Resolution 16 bit
Speed 250 kSamples/s
Cable length PC to CCN 2 m
PC
Minimum specifi cation
Processor
Pentium 2 GHz
RAM 2 GB
Hard disk 80 GB
Operating system Windows XP or Vista
Technical information
3 KVA 1-PHASE HARMONICS AND FLICKER
MEASURING SYSTEM
PROFLINE 2103
INA 2151, 1-phase IEC 61000-3-3 16 Amp reference impedance
CCN 1000-1L, 1-phase coupling unit with integrated IEC 61000-3-3 16 Amp impedance
INA 2188, Rack mounting kit for CCN 1000-1
INA 2189, Rack mounting kit for NSG 1007-3
Option 8, 1 m magnetic loop antenna 100 A/m continuous
Option 11-1, 1-phase AC switch used to switch power between the source (set to the lower
required voltage) and the mains supply in a time between 1-5 us. For detailed specification
please see separate datasheet.
Avionics immunity & emissions test capability for DO-160, Airbus and Boeing
Options
© February 2011 Teseq ®
Specifications subject to change without notice.
Teseq
® is an ISO-registered company. Its products
are designed and manufactured under the strict
quality and environmental requirements of the ISO
9001. This document has been carefully checked.
However, Teseq
® does not assume any liability for
errors or inaccuracies.
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[email protected]
www.teseq.com
691-267A February 2011