Atec Teseq-ProfLine_2100 - Manual (Page 2)

A d v a n c e d Te s t S o l u t i o n s f o r E M C
ProfLine 2100-1 ProfLine 2100-3
System contents CCN 1000-1 1-phase CCN 1000-3 1-phase
coupling unit coupling unit
DAQ card DAQ card
Interface cable Interface cable
WIN 2100 test software WIN 2100 test software
Coupling unit
Number of phases
1 3
Measurement channels 4 12
EUT connector: Front panel CEE 77 None
EUT connector: Rear panel Terminal block Terminal block
Max. voltage: Front panel 240 Vac N/A
Max. current: Front panel 16 Arms N/A
Max. voltage: Rear panel 300 Vac 480 Vac
Max. current: Rear panel 40 Arms/Ph. 40 Arms/Ph.
(200 A Pk for 10 ms) (200 A Pk for 10 ms)
Supply power: Voltage 115/230 Vac +/- 10% 115/230 Vac +/- 10%
Supply power: Current <0.5 A <0.7 A
Supply power: Frequency 50/60 Hz 50/60 Hz
Dimensions (H x W x D) 89 x 427 x 560 mm 89 x 427 x 560 mm
Weight 5 kg 5 kg
DAQ card and cable
Interface
PCI PCI
Size Standard height Standard height
Resolution 16 bit 16 bit
Speed 250 kSamples/s 1.25 MSamples/s
Cable length PC to CCN 2 m 2 m
Technical information
HARMONICS AND FLICKER MEASURING SYSTEM
PROFLINE 2100 - OVERVIEW
INA 2151, 1-phase IEC 61000-3-3 16 Amp reference impedance
INA 2154, 3-phase IEC 61000-3-3 16 Amp per phase reference impedance
CCN 1000-1L, 1-phase coupling unit with integrated IEC 61000-3-3 16 Amp impedance
INA 2188, Rack mounting kit for CCN 1000-1, CCN 1000-1L or CCN 1000-3
WIN 2106, Test software for IEC 61000-3-11 and IEC 61000-3-12
Options
© February 2011 Teseq ®
Specifications subject to change without notice.
Teseq
® is an ISO-registered company. Its products
are designed and manufactured under the strict
quality and environmental requirements of the ISO
9001. This document has been carefully checked.
However, Teseq
® does not assume any liability for
errors or inaccuracies.
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[email protected]
www.teseq.com
691-262A February 2011