Atec Teseq-Schaffner-NSG-5500 - Manual (Page 6)

The FT 5530 simulates fast transient interference
injected onto a vehicle’s electrical network through
switching processes influenced by the wiring
harness that can affect the correct operation of
electronic units. The FT 5530 simulates EFT bursts
with pulse widths of 100 or 150ns in conformance
with the standards for pulse 3a/3b interference
phenomena. The EFT generator more than meets
the automotive industry’s increasing demands with
its technical properties exceeding the specifica-
tions laid down in the standards by several factors:
higher pulse voltages, burst frequencies and pulse
variations and other burst specifications including
functions for weak spot analyses during long-term
trials. Technical specifications FT 5530
Pulse amplitude: 25 - 800V in 1V steps
lower voltages also pro-
grammable
Impedance: 50 Ω
Pulse rise time: 5ns
Pulse duration: 100ns ±10% and 150ns ±20%
Burst frequency: 1 - 100kHz in 0.1kHz steps
Pulse per burst: 1 - 200
Burst repetition: 90ms - 99.9s in 10ms steps
Pulse modes: Single, continuous,
programmed 1 - 99,999
FT 5530
EFT generator
ISO pulse 3a/3b and variants
The only fast transient generator featuring both 100ns and 150ns pulse widths
to cover the full range of standards.