Atec T-R-DMO200 - Manual

DMO200
33
Digital Micro-Ohmmeter
with USB data storage
mV Input
Sense input for 4 wire resistance
measurement.
Colour
LCD
Simultaneous
display of
current, mV and
resistance.
USB data
storage
All test results
can be stored
automatically on
a standard USB
memory key. The
unit has a real-
time clock to time
and date-stamp all
results. Results are
written to a CSV file
that can be opened
by any spreadsheet
program. A USB
keyboard is supplied to
add comments to
results.
Universal supply
90-264V supply voltage with no
restriction on output current.
Comment
Press this button to enter a new
comment on the keyboard.
Main Output
5V 1-200A pre-settable current.
Thermal and over-current
protection. <2.5% ripple.
Test current presets
Programmable buttons to set test
currents. Set to 50A, 100A and
200A by default.
A USB keyboard and 2Gb USB memory
key are supplied with the DMO200.
Standard lead set
High quality 3m 200A output leads
in carry case supplied with unit.
Current clamp input
Connect the optional DC current
clamp to measure resistances
with both sides earthed.
Optional extension lead sets
Optional output and sense extension lead sets
available in 3m, 5m and 10m lengths.
Optional Kelvin clamp lead set
Optional 200A Kelvin lead set-current injected
and sense voltage measured using one clamp.
Optional current clamp
NEW
32