Atec TTC-T-Berd-211 - Manual (Page 7)

The T-BERD 209A/211 options
provide added testing flexibility.
T
he T-BERD 209A/211 is a complete test and measurement solution for technicians who install, test, monitor,
and maintain T1 links and equipment. The T-BERD 209A/211 can be optioned to perform the following tasks:
Equipment Installation
• Verify proper circuit operation from point to point
• Ensure that loopback equipment responds to designated loopcodes
• Test equipment under different traffic conditions using built-in fixed and pseudorandom test patterns
Circuit Maintenance and Problem Isolation
• Monitor the circuit for intermittent problems that may become more serious over time
• Avoid the expense of taking the circuit out of service
• Analyze live traffic without introducing any disturbances on the line
• Identify and locate cable pair faults including shorts, bridge taps, load coils, and other line impairments
Out-of-Service Troubleshooting
• Stress and analyze the network with point-to-point and loopback testing
Added Testing Flexibility
Power up and troubleshoot spans with the
Repeater Power Supply and T1 Repeater Extender
during span installation and maintenance. Monitor
channels and signaling bits with the T1 Channel
Monitor. Document your test results with the Thermal
Graphics Printer.
Applications