Atec Tektronix-SJ300E User Manual
Page 3
52 MHz: ±1%, ±0.01 UI.
155 MHz: ±1%, ±0.02 UI.
622 MHz: ±1%, ±0.03 UI.
Fine Mode -
Frequency response: First-order high-pass
filter with cutoff frequencies that depend on
receiver baud rate as follows:
52 Mb/s: 14 Hz + 3 Hz.
155 Mb/s: 30 Hz + 10 Hz.
622 Mb/s: 120 Hz + 35 Hz.
Jitter amplitude: Up to 0.6 UI
p-p
depending on the jitter
frequency and receiver baud rate.
Resolution: 0.001 UI.
Amplitude Accuracy:
52 MHz: ±3%, ±0.002 UI.
155 MHz: ±3%, ±0.003 UI.
622 MHz: ±5%, ±0.009 UI.
Transfer Functions
Range - +3 to -50 dB.
Resolution - 0.01 dB.
Note: The maximum jitter amplitude received cannot exceed the
maximum receiver input range.
Receiver RMS Jitter
Wide Mode -
Frequency response: First-order high-pass filter at the greater of
12 kHz and the selected high-pass filter. Third-order, maximally
flat, low-pass filter at 1/125 of the receiver baud rate.
Jitter range: Measures RMS value of jitter that meets the wide
mode peak-to-peak jitter tolerance.
Resolution: 0.01 UI.
Amplitude accuracy:
52 MHz: ±3%, ±0.01 UI
rms
.
155 MHz: ±3%, ±0.01 UI
rms
.
622 MHz: ±3%, ±0.02 UI
rms
.
Fine Mode -
Jitter range: Measures RMS value of jitter that meets the