Atec Tektronix-SJ300E User Manual
Page 2
Impedance: 50 Ohm to 2 V terminated.
Connector: BNC.
Optical Out -
Baud rate: Equals frequency of CLOCK OUT.
Connector: FC/PC.
Mean output power (EOL): -9 dBm ±3 dBm.
Center wavelength: 1305 nm ±35 nm.
Spectral width (at -3 dB): 5 nm maximum.
Ref Clock Out -
Output: Same as CLOCK out without added jitter.
Amplitude: 0.4 to 1.2 V
p-p
into 50 Ohm.
Impedance: 50 Ohm AC-coupled, to ground.
Connector: BNC.
Transmitter Inputs
Clock In -
Frequency: 51.84, 155.52 or 622.08 MHz ±100 ppm.
Level: ECL nominal levels.
Impedance: 50 Ohm or AC-coupled.
Connector: BNC.
Thru Data In -
Level: ECL nominal levels.
Impedance: 50 Ohm to -2 V terminated, NRZ.
Connector: BNC.
External Modulation In -
Impedance: 50 Ohm terminated to ground.
Connector: BNC connector.
Sensitivity: 0.1 V/UI.
Accuracy: ±5%.
Amplitude limits: ±0.8 V maximum.
Rate-of-change limits:
52 MHz: ±0.135 V/µs.
155 MHz: ±0.405 V/µs.
622 MHz: ± 1.62 V/µs.
Receiver Peak-to-Peak Jitter
Wide Mode -
Jitter amplitude: Up to 16 UI
p-p
depending on the jitter
frequency and receiver baud rate.
Resolution: 0.01 UI.
Amplitude accuracy:
- Anritsu-PIM-MW82119A (2 pages)
- Boonton-PIM31 (6 pages)
- AWT-PIM-S1L-Tetra Series (2 pages)
- AWT-PIM-S1P Series (2 pages)
- AWT-PIM-S1L Series (2 pages)
- AWT-PIM-Expandable Series (2 pages)
- AWT-PIM-Single Series (2 pages)
- CCI-PimPro (4 pages)
- JDSU-FST-2310 (10 pages)
- JDSU-T-Berd-6000 (8 pages)
- Agilent-N9912A (2 pages)
- Agilent-E5515C (4 pages)
- Agilent-E4406A (20 pages)
- Agilent-N4010A (16 pages)
- Anritsu-S412E (19 pages)
- Anritsu-S810D-S820D (2 pages)
- Anritsu-S820E (16 pages)
- Anritsu-MT8221B (24 pages)
- Anritsu-MT8221B (28 pages)
- Anritsu-S412D (16 pages)
- Anritsu-MT8222A (8 pages)
- Anritsu-MT8220T (28 pages)
- Anritsu-MT8212E-MT8213E (32 pages)
- Anritsu-S332D-31D (12 pages)
- Anritsu-MT8212A (2 pages)
- Bird-SA Series (2 pages)
- Anritsu-S331E-S332E-S361E-S362E (16 pages)
- Anritsu-S331L (12 pages)
- Advantest-Q8163 (1 page)
- Agilent-83557A-83558A (4 pages)
- Agilent-8169A (6 pages)
- Agilent-11896A (5 pages)
- Agilent-81689A_B-81649A (6 pages)
- Agilent-8163A-81634A (8 pages)
- Agilent-81624B (11 pages)
- Agilent-81618A (112 pages)
- Agilent-8703A (16 pages)
- Agilent-8156A (8 pages)
- Advanced-Fiber-Solutions-OLK51 Series (5 pages)
- Anritsu_MS9720A (12 pages)
- Anritsu-ML9001A (4 pages)
- Corning-Optivisor400 (6 pages)
- Anritsu_CMA5000a (4 pages)
- Agilent-E6008B (12 pages)
- AFL-Noyes-FLX3 (6 pages)