Atec Fisher-Rosemount-HART-375 - Manual (Page 3)

With over 600 different HART and
Foundation fieldbus devices from
more than 100 different vendors,
having a single field communicator
that works with everything is a big
help. So, grab the 375 Field
Communicator and go!
Page 3
■ Universal – HART and
Foundation fieldbus
The 375 Field Communicator is
designed to support all HART
and Foundation fieldbus devices.
If you are familiar with the 275
HART Communicator, used in
thousands of plants worldwide
for more than ten years, you will
appreciate universal HART
support in a single intrinsically
safe handheld communicator.
The 375 Field Communicator
can also be used to configure all
the Foundation fieldbus devices
in your plant. Use it to perform
diagnostics for effective start-up
and troubleshooting of Foundation
fieldbus segments. Create a quality
segment by diagnosing the network
DC voltage and average noise.
Detect power supply problems
by monitoring low frequency noise
on a segment. Locate incorrect
terminations and faulty devices by
diagnosing the communications
signal level. No longer do you need
to drag a laptop computer out into
the plant to communicate with your
Foundation fieldbus devices.
Designed not only for use on the bench, the 375 Field Communicator
enables you to do those tasks that just have to be done in the field.
Product Data Sheet
December 2003
375 Field Communicator