Atec Fluke-5502A - Manual (Page 6)

6 5502A Multi-Product Calibrator
Function and range
Direct volts
0 to ± 1020 V
Direct current 0 to ± 20.5 A
Alternating volts 1 mV to 1020 V
10 Hz to 500 kHz
Volt/hertz 1000 V@ 10 kHz/330 V@100 kHz
Alternating current 29 µA to 20.5 A
10 Hz to 30 kHz
Waveforms Sine, square, triangle, truncated sine
Resistance 0 Ω to 1100 MΩ
Capacitance 220 pF to 110 mF
Power (phantom loads) 20.9 kW
Phase control 0.01°
Thermocouple (source and
measure temperature)
B, C, E, J, K L N R, S, T, U
10 µV/°C and 1 mV/°C
RTD (source temperature) Pt 385-100 Ω, Pt 3926-100 Ω Pt 3916-100 Ω, Pt 385-200 Ω,
Pt 385-500 Ω, Pt 385 1000 Ω, PtNi 385-120 Ω (Ni120),
Cu 427 10 Ω
Interfaces RS-232, IEEE 488
Frequency uncertainty < 25 ppm
Oscilloscope calibrator (options) Levelled sine wave from 5 mV to 5.5 Vpp max, frequencies
50 kHz to 600 kHz; edge rise times of < 300 ps, multiple trig-
ger functions, lowest dc, square wave and timing uncertainty
Amplified current
(accessory amplifier)
Extend from 20.5 A to a maximum of 100 A dc and 120 A ac
from 10 Hz to 10 k Hz
Summary
specifications
Calibrate
almost
anywhere
Rugged transit
case makes on-site
calibration safe,
easy, convenient
An optional shock-mounted
transit case featuring built-
in handles and wheels gives
you the option of taking the
calibrator to the workload
for on-site or mobile appli-
cations. Once at the site,
just remove the front and
rear doors from the case
for access to the 5502A’s
front and rear panels—the
top, bottom and sides of the
calibrator remain protected,
and you don’t need to fully
unpack the calibrator for
each use.