Atec Fluke-9190A - Manual (Page 5)

5 Fluke Calibration 9190A Ultra-Cool Field Metrology Well
9190A Ultra-Cool Field Metrology Well
Model Description
9190A-X Ultra-Cool Field Metrology Well, –95 °C to 140 °C, with
9190-INSX
9190A-X-P Ultra-Cool Field Metrology Well, –95 °C to 140 °C, with
9190-INSX, with Process Electronics
‘X’ in the above model numbers to be replaced with A, B, C, D, E, and F as
appropriate for the desired insert. See the inserts illustration and listing
below.
Recommended accessories
Model Description
9190-INSA Insert “A” 9190, imperial miscellaneous holes
9190-INSB Insert “B” 9190, imperial comparison holes
9190-INSC Insert “C” 9190, 0.25 inch holes
9190-INSD Insert “D” 9190, metric comparison holes
9190-INSE Insert “E” 9190, metric miscellaneous holes with 0.25
inch hole
9190-INSF Insert “F” 9190, metric comparison miscellaneous holes
with 0.25 inch hole
9190-INSY Insert “Y” 9190, custom insert
Custom insert is based on a maximum of eight holes.
Please contact your local sales representative if you have special
requirements.
9190-INSZ Insert “Z” 9190, blank
Ordering Information
Fluke Calibration
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (877) 355-3225 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.flukecal.com
©2013 Fluke Calibration.
Specifications subject to change without notice.
Printed in U.S.A. 1/2013 4264972A D-EN-N
Pub-ID 12027-eng
Modification of this document is not permitted
without written permission from Fluke Calibration.
Fluke Calibration.
Precision, performance, confidence.
™