Atec Multidyne-TS12-10B - Manual (Page 2)

TS12-10B STANDARD TEST SIGNAL SET
12 Transmission and Alignment Test Signals: SMPTE Color Bars,
Cross Hatch, Red Field, (SIN X)/X, NTC-7 Composite, Gated Pulse
and Bar, Modulated Stair Step, 5 MHz Line Sweep, NTC-7
Combination, Multipulse, FCC Multiburst and a matrix of Color Bars,
Multiburst and NTC-7 Composite.
TS12-10B-RM STANDARD TEST SIGNAL SET
12 Transmission and Alignment Test Signals: SMPTE Color Bars,
Cross Hatch, Red Field, FCC Multiburst, NTC-7 Combination, NTC-7
Composite, 5 MHz Line Sweep, Multipulse, Modulated Stair Step,
Black Burst, (SIN X)/X and a matrix of Color Bars, Multiburst and
NTC-7 Composite.
TS12-10B and TS12-10B-RM Rear View
SPECIFICATIONS
Conforms to the RS-170A specification.
Exceeds the RS-250C Short-haul specification.
Video output impedance ............................................................................. 75 Ohms
Differential gain ........................................................................................... < +/- 0.25 %
Differential phase ........................................................................................ < +/- 0.25 degrees
Chrominance to luminance gain ................................................................. < +/- 0.25 %
Chrominance to luminance delay................................................................ < +/- 2.5 n sec.
Luminance amplitude accuracy .................................................................. < +/- 0.25 %
Frequency response to 5 MHz.................................................................... < +/- 0.25 %
Ringing ........................................................................................................ < +/- 0.5 %
Tilt................................................................................................................ < +/- 0.1 %
Signal to noise............................................................................................. < -84 dB
Vertical interval test signals (VITS) ............................................................. NTC-7 Composite Line 18 Fields 1,2;
NTC-7 Combination Line 17 Field 1
Character generator, user-programmable .................................................. 32 characters, 16 messages.
Character generator message retention ..................................................... up to 10 years, lithium battery-backed RAM
Vertical interval character ID ....................................................................... 16 character insertion into ext. video.
Automatic by-pass, loss of video detection................................................. sync recognition
Audio output impedance, balanced............................................................. 50 Ohms
Tone frequency ........................................................................................... 400 Hz, 1 KHz, 8 KHz
Audio output level, adjustable ..................................................................... -60 dBu to +10 dBu
Right audio channel ID................................................................................ 0.5 Hz click
Distortion ..................................................................................................... < 0.05%
DC input voltage range, TS12-10B only ..................................................... 6 - 20 VDC
Power dissipation ........................................................................................ 1.2 Watts, max.
Battery operation, 4 AA batteries, TS12-10B only ...................................... up to 12 hours
AC operation, TS12-10B only ..................................................................... wall-mount AC supply, included
AC operation, TS12-10B-RM only .............................................................. 115 or 230 VAC
Dimensions, TS12-10B ............................................................................... 6 7/8" x 5 3/4" x 1 3/4"
Dimensions, TS12-10B-RM ........................................................................ 8" x 19" x 1 3/4"
Ordering Information:
•
Model TS12-10B Handheld 10 Bit NTSC Test Signal Generator with 12 NTSC video test signals, 16 message
user-programmable character generator, black burst output and 3 frequencies of stereo audio tone.
•
Model TS12-10B-RM Rack-mounted 10 Bit NTSC Test Signal Generator with 12 NTSC video test signals, black
burst output and 3 frequencies of stereo audio tone.
•
Options: -AB Automatic By-pass with loop-through of external video and stereo audio, TS12-10B-RM only.
-M 16 message, user-programmable, character generator with vertical interval character ID of external video, TS12-
10B-RM only, -VITS Vertical Interval Test Signals. -RAMP 95 to 100 IRE RAMP Test Signal. -STAIR 5 Step
Staircase.
In the USA and Canada call 1-(800)-4TV-TEST
191 Forest Avenue, Locust Valley, NY 11560-2132 USA
1-(800)-488-8378, (516)-671-7278, FAX (516)-671-3362
E-Mail: [email protected]
Web Site: www.multidyne.com