Atec Sencore-S310 User Manual

Page 3

TEST PATTERN GENERATOR SPECIFICATIONS

Outputs - 1 parallel digital output to CCIR Rec. 656, 2 270 Mb/s serial digital outputs at 75 Ohms.

Calibrated errors on parallel signal - Level errors can be introduced in the clock signal and on the two most

signiﬁcant bits. PEAK-TO-PEAK LEVEL ERROR: Vpp minimum = 0.25 V, ±0.1 V, Vpp nominal = 1.1 V, ±0.1

V. AVERAGE LEVEL ERROR: Vav min = 1.60 ±0.05 V, Vav nom = 1.29 ±0.05 V, Vav max = -0.95 ±0.05 V.

RIPPLE VOLTAGE ERROR: 1V ±10% at 122 Hz or 7812 Hz. CLOCK/DATA PHASE ERROR: -12 ns to +16

ns in steps of 4 ns, ±2 ns precision for each step.

Errors common to parallel and serial signals - Ability to introduce reserved codes as well as errors in TRS

word and preambles. JITTER ERROR: 4 ±1 ns at 122 Hz or 976 Hz.

Patterns - PATTERNS AVAILABLE: 34. OF WHICH: CCIR - 14 patterns, user conﬁgurable - 2 patterns, oth-

ers - 18 patterns. ACCESSIBLE VIA FRONT-PANEL CONTROLS: 16 patterns. ACCESSIBLE VIA SOFT-

WARE/SERVICE MODULE: 34 patterns. PATTERN 1: 75% colour bars. PATTERN 2: 100% colour bars.

PATTERN 3: multi-burst. PATTERN 4: green (270 Mb/s serial test). PATTERN 5: magenta (270 Mb/s serial

test). PATTERN 6: grey. PATTERN 7: black and white alternating at 0.1 Hz. PATTERN 8: end-of-lines pulses.

PATTERN 9: black/white ramp. PATTERN 10: yellow/grey ramp. PATTERN 11: grey/ blue ramp. PATTERN

12: cyan/grey ramp. PATTERN 13: grey/red amp. PATTERN 14: Cb, Y, Cr, Y ramps. PATTERN 15: program-

mable pattern. PATTERN 16: programmable pattern. PATTERN 17: white end-of-line porches. PATTERN 18:

blue end-of-line porches. PATTERN 19: red end-of-line porches. PATTERN 20: yellow end-of-line porches.

PATTERN 21: cyan line end-of-line porches. PATTERN 22-34: grey.

GENERAL SPECIFICATIONS

CONSTRUCTION:2U 19” rack mounting unit. DEPTH: 328 mm (13”). WEIGHT: Basic unit - 5 kg (11 lbs),

with all options - 6.2 kg (13.64 lbs). AMBIENT TEMPERATURE RANGE: +5°C to +45°C.

ELECTRICAL SPECIFICATIONS

POWER SUPPLY: 105-130 V AC, 50-60 Hz (220 V Opt). MAXIMUM CONSUMPTION: 50 watts (all op-

tional modules included). FUSE: 1.6 A (time-delay fuse).