Atec Krohn-Hite-3364 - Manual (Page 4)

f/fc
(Hz)
Amp
(dB)
Phase
(Deg)
Delay (1)
(sec)
0.00 0.000 0.000 0.336
0.10 -0.028 -12.100 0.336
0.20 -0.111 -24.200 0.336
0.30 -0.251 -36.300 0.336
0.40 -0.448 -48.400 0.336
0.50 -0.705 -60.600 0.336
0.60 -1.020 -72.700 0.336
0.70 -1.410 -84.800 0.336
0.80 -1.860 -96.800 0.335
0.85 -2.110 -103.000 0.334
0.90 -2.400 -109.000 0.333
0.95 -2.690 -115.000 0.332
1.00 -3.010 -121.000 0.330
1.10 -3.710 -133.000 0.325
1.20 -4.510 -144.000 0.318
1.30 -5.390 -156.000 0.308
1.40 -6.370 -166.000 0.295
1.50 -7.420 -177.000 0.280
1.60 -8.540 -187.000 0.263
1.70 -9.710 -195.000 0.246
1.80 -10.900 -204.000 0.228
1.90 -12.200 -212.000 0.211
2.00 -13.400 -219.000 0.194
2.25 -16.500 -235.000 0.158
2.50 -19.500 -248.000 0.129
2.75 -22.400 -259.000 0.107
3.00 -25.100 -267.000 0.089
3.25 -27.600 -275.000 0.076
3.50 -30.000 -281.000 0.065
4.00 -34.400 -291.000 0.049
5.00 -41.900 -305.000 0.031
6.00 -48.100 -315.000 0.021
7.00 -53.400 -321.000 0.016
8.00 -58.000 -326.000 0.012
9.00 -62.000 -330.000 0.009
10.00 -65.700 -333.000 0.008
Note (1)
Normailzed Group Delay: is normailzed to a frequency
of 1.0Hz. The actual delay is the normalized delay
divided by the actual corner frequency (fc).
DOC# KHFDAT02
4-Pole Low-Pass Bessel
Theoretical Transfer Characteristics