Atec Krohn-Hite-3364 - Manual (Page 2)

SPECIFICATIONS
Specifications apply at 25°C, ±5°C.
FUNCTIONS
Low-pass filter, high-pass filter. Provides two channel of
band-pass or band-reject via external connections.
FILTER CHARACTERISTICS
Type: 4-pole, selectable Butterworth and Bessel.
Attenuation Slope: 24dB/octave.
Tunable Frequency Range fc: 0.1Hz to 200kHz; (option
002, 0.005Hz).
Frequency Resolution: 0.001Hz, 0.1Hz to 0.999Hz; 3
Digits, 1Hz to 200kHz, (option 002, 0.001Hz from 0.005Hz
to 0.1Hz).
Cutoff Frequency Accuracy: ±3%.
Relative Gain at fc: –3dB, Butterworth; –7.58dB, Bessel.
High-Pass Bandwidth (0dB Gain): >2MHz.
Stopband Attenuation: >80dB.
Wideband Noise (2MHz bandwidth detector): 0dB gain,
<400µVrms. Max. gain, <25µVrms RTI.
Harmonic Distortion (1V input, 0dB gain): –60dB (0.1%)
to 10kHz; –50dB (0.3%) to 100kHz.
DC Stability: Typically ±1mV/°C.
Input: Differential or single-ended.
Pre-Filter Gain: 0dB, 10dB, 20dB, 30dB, 40dB, 50dB,
±0.2dB.
Impedance: 1 megohm in parallel with 25pf.
Maximum Input: ±10V peak at 0dB gain, reduced in
proportion to gain setting.
CMRR: >60dB to 10kHz; >50dB to 100kHz.
Coupling: ac (0.16Hz) or dc.
Sensitivity: 3mV peak with 70dB total gain for 10V
peak output.
Maximum DC Component: ±100V in ac coupled
mode.
Output:
Post-Filter Gain: 0dB to 20dB in 0.1dB steps, ±0.2dB.
Maximum Voltage (open circuit): ±10V peak.
Maximum Current: ±80mA peak.
Impedance: 50 ohms.
DC Offset: Adjustable to zero volts.
GENERAL
Crosstalk Between Channels ( input source £50 ohms):
–80dB for fsig £200kHz, –70dB for fsig >200kHz.
Memory: 9 stored set-ups.
Self-Test Diagnostics: MPU checks unit upon power-up.
Display indicates failure mode.
Displays: 7 segment, green, LED; 0.3" high.
Operating Temperature: 0°C to 50°C.
Isolation to Chassis: ±200Vdc.
Input/Output Connectors: BNC.
Power Requirements: 90-132/180-264 volts ac,
50Hz-400Hz, 10 watts (3361), 15 watts (3362), 30 watts
(3364).
Dimensions and Weights: 3.5“ (9cm) high, 14" (36cm)
wide, 12.5” (32.13cm) deep; 12 lbs (5.4kg) net, 14 lbs
(6.3kg) shipping.
Accessories: 3-terminal line cord; operating manual.
OPTIONS
002: extends low end cutoff to 0.005Hz.
BK-330: Line/battery operation.
Rack Mount Kit: Part No. RK-314, permits installation of
the Model 3364 into a standard 19" rack spacing.
Extended 1 Year Warranty: Part No. EW3364.
OPTIONAL ACCESSORIES
CAB-025: Cable, BNC, 3ft, Low Noise
Specifications subject to change without notice.
0.1Hz to 200kHz Four Channel Filter Model 3364
Krohn-Hite Corporation, 15 Jonathan Drive, Unit 4, Brockton, MA 02301 Page 2 of 2
Tel: 508-580-1660; Fax: 508-583-8989; www.krohn-hite.com; email: [email protected]
3364Data.vp