Mt 4100, Broadband cw twt lab amplifier – Atec MCL-MT4100 Series User Manual
Page 2
MT
4100
BROADBAND CW TWT LAB AMPLIFIER
SSA
RF
INPUT
RF
OUTPUT
FWD. COUPLER
TEST POINT
CIRCULATOR
TWT
REV. COUPLER
DETECTOR
FWD. COUPLER
DETECTOR
R F B L O C K D I A G R A M
ELECTRICAL
SPECIFICATIONS
Note: Performance information is subject to change without notification. Contact MCL for the latest specifications (TN4100-1).
MT4100
535-2.5/7.5
450-2/8
300-6/18
250-7.5/18
50-18/26.5
40-26.5/40
Mechanical Configuration
Figure 1
Figure 1
Figure 2
Figure 2
Figure 2
Figure 2
Frequency Range (Fo) Standard
2.5 - 7.5 GHz
2.0 - 8.0 GHz
6.0 - 18.0 GHz
7.5 - 18.0 GHz
18.0 - 26.5 GHz
26.5 - 40.0 GHz
Output Power (min.):
HPA Rated Output (min.):
2.0 - 2.5 GHz
500 W
125 W (51.0 dBm)
250 W
250 W
45 W
35 W
(57.0 dBm)
2.5 - 8.0 GHz
(53.7 dBm)
(53.7 dBm)
(46.5 dBm)
(45.4 dBm)
370 W (53.2 dBm)
HPA Typical Output:
2.0 - 2.5 GHz
175 - 500 W
550 - 825 W
(52.4-57.0 dBm)
325 - 350 W
320-350 W
75-95 W
35-65 W
(57.4 - 59.2 dBm)
2.5-8.0 GHz
(55.1-55.4 dBm)
(55.1-55.4 dBm)
(48.7-49.8 dBm)
(45.4-48.1 dBm)
475 - 725 W
(56.8-58.6 dBm)
Gain:
Large Signal (min.):
60 dB
45 dB
50 dB
Small Signal Gain (SSG) (min.)
63 dB
50 dB
60 dB
Attenuation Range with optional SSA:
20 dB
Maximum SSG Variation Over:
Full Band:
15 dB max. (7 dB max. with equalizer)
12 dB max. (5 dB max. with equalizer)
20 dB max.
Gain Stability:
±0.25 dB/24 hr. max (constant drive, line voltage and temp.)
Stability, Any Freq. 0 to +40°C:
6.0 dB typ.
Stability, Any Freq. ±10° Max.:
1.2 dB typ.
Input VSWR:
2.0:1 max. with respect to 50 ohms
Output VSWR:
2.5:1 typ.
Load VSWR:
2.0:1 max. without damage, continuous
Residual AM Noise, Max.:
To 10 kHz
40 dBc max.
10 - 500 kHz
-20 (1.0 + Logƒ kHz) dBc
Above 500 kHz
57 dBc max.
Harmonic Output, Max.:
-4 dBc
Noise & Spurious, Max.:
Transmit Band (Fo)
-70 dBm/Hz
Prime Power:
Voltage:
180 - 264 VAC, single phase
100 - 264 VAC, single phase
Power Consumption:
2.7 KVA max.
1.9 KVA max.
900 VA max.
800 VA max.
Power Factor:
0.95 min.
In-Rush:
28A max.
Input Transients:
EN61000-4-4, 4-5, 4-11 (Surge, Fast Transients, Line Dropout)