Atec Kepco-EL Series - Manual (Page 4)

KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11355 USA • Tel: (718) 461-7000 • Fax: (718) 767-1102
Email: [email protected] • www.kepcopower.com
SERIES EL SPECIFICATIONS
(1) Specifications measured @ 23°C ambient.
(2) regulation specified after 15 minutes of operation at set power level.
(3) Accuracy and regulation specifications are valid from 5% to 100% of full scale.
Accuracy is relative to full scale value and not the setpoint.
Linearity vs. Programming Command
Constant Current Accuracy
Constant Power Accuracy
Constant Voltage Accuracy
Constant resistance Accuracy
Constant Conductance Accuracy
regulation (2)
Constant Current
Constant Power
Constant Voltage
Constant resistance
Constant Conductance
resolution (Via Computer Control)
Current readback
(Current Mode)
Parameter readback
(Current and Voltage)
Computer Accuracy
Computer resolution
Accuracy
resolution
±0.25%
±2%
±0.25%
±1%
±1%
±0.25%
±1%
±0.25%
±1%
±1%
14 Bits
±0.25%
±15 Bits
±0.25%
±15 Bits
5-100% of Full Scale (3)
5-100% of Full Scale (3)
5-100% of Full Scale (3)
5-100% of Full Scale (3)
MODE CHARACTERISTICS
CONTROL CHARACTERISTICS
uses IEEE 488.2 and SCPI
commands and queries
requires no cost downloadable driver
Baud rate: 38400 Parity: None
Data Bits: 8 Stop Bits: 1 Echo: OFF
Add suffix "G" to model number for GPIB
Add suffix "E" to model number for Ethernet
uSB Interface
rS 232 Interface
GPIB Interface
Ethernet Interface
GENERAL CHARACTERISTICS
120-240V a-c (108 to 264V a-c limits)
50-60 Hz, 200 watts
0°C to 40°C
19"w x 7"H x24.5"D
88 lbs.
-20 to +60°C, 15 to 80% rH relatively dust free environment
a-c Line Power Input
Operating Temperature
Dimensions (Load)
weight (Load)
Storage requirements
RATING/DESCRIPTION (1) CONDITION SPECIFICATION
APPLICATIONS
AUTOMOTIVE - LIFE-CYCLE TESTING OF HYBRID CONTROL MODULES • FUEL CELL TEST
WINDMILL CHARACTERIZATION AND PERFORMANCE TESTING • WEAPONS BATTERY TESTS
HELICOPTER POWER GENERATOR FLIGHT LINE TEST
POWER SUPPLY TESTING • HIGH PERFORMANCE BATTERY TEST