Atec NHResearch-4700Series - Manual (Page 2)

Just as touch-panels have revolutionized the user
interface on mobile phones and GPS navigation
devices, they now are about to change electronic
power instruments. The old paradigm of controlling
electronic loads through knobs, meters and keypads
has been lacking for years. There are just too many
control & display functions to manage, especially
with the latest generation of smart loads that contain
digitized measurements for oscilloscope-like
waveform displays.
The new NHR PowerTouch panel eliminates those
limitations forever. The display is organized through
POWERTOUCH MANUAL CONTROL
Monitor Tab Control tab
6 tabs, each providing a full screen with complete
control & display of related information. For instance,
a Monitor tab displays actual measurements either in
the local or remote-control mode. A Control tab
provides for setting voltage, current, resistance and
power as well as the CC, CV, CR and CP Operating
Modes. The unique Scope tab provides the ability to
zoom in on specific areas of interest as well as take
basic measurements on waveform captures. Those
waveform captures can then be saved on a SD card for
later review on a PC. Load user interfaces have never
been as comprehensive or easier to use as is now
possible with this touch-panel technology.
Scope Tab
Actual Size