Atec NHResearch-4600 Series - Manual (Page 3)

HIGH ACCURACY MEASUREMENTS
The 4600 Series provides high-accuracy frequency, voltage, peak voltage, current, peak current, crest factor,
apparent power, true power, peak power, reactive power, power factor and resistance measurements by combining
high-resolution measurements with precision ranging. The ability to make measurements internally eliminates
multiple external measurement instruments plus associated signal matrixing. In this manner the 4600 provides for
a more compact, less costly and considerably faster test system.
WIDE RANGE OF POWER LEVELS
The 4600 Series is now offered in 6 power levels between 3 and 36 kW.
Any unit can be field expandable in 3 kW increments to address future
higher power needs. Contact factory for loads higher than 36 kW.
GRAPHIC USER INTERFACE
A PC-hosted graphic user interface eclipses the traditional front panel
clutter of knobs, dials, keypads, and digital displays that are carry-over
from a time of test instrumentation with a far more limited set of
features. In addition to a more comprehensive presentation of operation,
measurement and status information, softpanel advantages include the
ability to program and recall Macros, editing of user-defined waveforms
along with display of real-time current, voltage and power waveforms
without an oscilloscope.
1 2 3 4 5 6 7 8
9 10 11 12
PANEL OVERVIEW
PC SOFT PANEL
1. Control Power switch
2. Fault indicator light
3. Load Power switch
4. Status indicators 5. Address switch
6. Trig In/Out connectors
7. Chassis GND stud
8. Load Power Input connector 9. Hold In/Out connectors
10. RS 232 connector
11. COMM In/Out connectors
12. AC input connector
Operating Envelopes
1_NHR 4600 D.S.:NHR 4600 D.S. 8/20/09 11:02 AM Page 3