Atec Fluke-39-41B User Manual
Features, Three views of each reading, Safety conformance
The Model 39 Power Meter and 41B
Harmonics Analyzer combine the ease of
use of a digital multimeter, the visual
feedback of an oscilloscope and the
power of a harmonics analyzer in a
single instrument. If you're testing power
on three-phase systems or trouble-
shooting harmonics on non-linear loads,
no test tool makes it easier.
The Model 41B is ideal for further
analyzing data and optimizing system
performance. Use the Model 41B'$
FlukeView
software (included) to
download acquired data to a printer or
an MS-DOS or Windows
compatible
computer for analysis and presentation.
Three Views of each reading:
• Waveform
• Bargraph showing harmonic levels
Numeric values
a Real-time display updates. Display
updates three times per second,
providing a dynamic view of actual
circuit conditions
Comprehensive measurements.
Measure rms, peak and total harmonic
distortion (THD( for complex voltages
and currents - with no manual
calculations required.
„a
Three-Phase readings
From a simple single-phase
measurement, automatically calculates
three-phase power and power factor
for three-wire balanced loads,
System Critical Data Immediate
readings of Power Factors, KVAR,
Crest Factor, K-Factor
• Display Harmonics individually to
the 31 st
• Min/Max and Average recording
• Data Storage of up to eight complete
measurement sets (Fluke 41B)
*On-line Data Logging with connection to
laptop computer (Fluke 41B(
Safety Conformance
Independently tested and approved
for CSA C22.2 No. 1010-1, TUV to
EN61010 and UL3111 listing. Protected
to IEC 61010-1 Category III 600V
Features
Direct 30 power readouts from simple single-phase measurement
i
True-rms voltage from 5.OV to 600V
True-rms current from 1A to SODA (1000A with optional probe}
Peak, DC. and Crest Factor
Total harmonic distortion (%THDF and %THDR)
Active power from IOW to 3OOkW (6OOkW with optional probe}
Apparent power (VA) & Reactive Power (VAR)
Total Power factor (PF)
Displacement Power Factor (DPF)
K-factor
Frequency from 6Hz - 99.9Hz (fundamental)
Harmonics to 31st
Phase angle of fundamental and harmonics
Waveform, text and spectrum displays
Record mode - MIN. MAX and AVG
Zoom mode on harmonics bargraphs
46
0
Memory for 8 complete data sets
Data Logging
Optically isolated RS-232 interface
FfukeView PC software for Windows and DOS included