Atec Ludeca-OptalignPlus - Manual (Page 6)

From the inventors of laser shaft alignment
PRÜFTECHNIK Alignment Systems
Oskar-Messter-Straße 15
D-85737 Ismaning, Germany
www.pruftechnik.com
Phone: +49 (0)89 99 61 60
Fax:
+49 (0)89 99 61 61 00
eMail: [email protected]
Visit us at www.pruftechnik.com
PC software for advance job setup,
archival, reporting
II 2 G
OPTALIGN ® PLUS Series technical data
• Supports two-way communica-
tion between device and a PC
• Set up alignment jobs in advance
• View alignment results
• Optimise alignment corrections
• Copy measurement files into an
archive
• Print out customised alignment
reports with company logo
• Long names in a tree structure
for company, plant, section and
machine
• Drag and drop files to other
documents, e.g. eMail, MS Word
• Measurement reports in HTML
format can be sent using email
and opened using any browser
Printed in Germany ALI 9.567.03.04.0G
OPTALIGN ® is a registered trademark of PRÜFTECHNIK Dieter
Busch AG. No copying or reproduction of this information, in any
form whatsoever, may be undertaken without express written
permission of PRÜFTECHNIK AG. The information contained in
this leaflet is subject to change without further notice due to the
PRÜFTECHNIK policy of continuous product development.
PRÜFTECHNIK products are the subject of patents granted or
pending throughout the world.
© Copyright 2004 by PRÜFTECHNIK AG.
Transducer
Measurement principle Coaxial, reflected laser beam
Environmental protection IP 67 (submersible, dustproof)
Ambient light protection yes
Temperature storage -20°C to 80°C / -4°F to 176°F
operating 0°C to 55°C / 32°F to 131°F
Dimensions approx. 107 x 70 x 49 mm
4 1/4" x 2 3/4" x 2"
Weight: only about 177g / 6½ oz.
Laser
Laser Ga-Al-As semiconductor laser
Wavelength (typical) 675 nm (red, visible)
Safety class Class 2; FDA 21CFR 1000 and 1040
Beam power < 1 mW
Safety precautions Do not look into laser beam
Detector
Measurement area unlimited, dynamically extendible
(U.S. Patent 6,040,903 )
Resolution 1 µm
Accuracy (av.) > 98%
Inclinometer
Measurement range 0° to 360°
Resolution <1°
Reflector
Type 90° roof prism
Accuracy (av.) > 99%
Environmental
protection
IP 67 (submersible, dustproof)
Temperature:
storage
-20°C to 80°C / -4°F to 176°F
operating -20°C to 60°C / -4°F to 140°F
Dimensions: approx. 100 x 41 x 35 mm
4" x 1 5/8" x 1 3/8"
Weight: approx. 65g / 2½ oz.
Control Unit
Display fixed-segment LCD display
Display dimensions approx. 94 x 73 mm / 3 3/4" x 2 7/8"
Keyboard robust, flat, greaseproof keyboard
Environmental IP 65 (water spray resistant, dustproof -
protection except for sealed battery compartment);
fully electrically insulated
Operating temp. 0°C to 55°C / 32°F to 131°F
Main power supply 6 x 1.5V IEC LR6 ("AA") batteries
(even rechargables)
Backup power supply 1 x 9V IEC 6LR61 battery
Battery life (alkaline) 25 hours on main batteries plus 3 hours on
reserve battery - based upon an operating
cycle of 25% measurement, 25%
computation and 50% ‘sleep mode’
Interfaces 1 x sensor; 1 x printer/PC (serial)
Dimensions approx. 145 x 290 x 67 mm
5 3/4" x 11 1/2" x 2 3/4"
Weight w/o batteries approx. 1.1 kg / 2.4 lb.
Carrying case
Standard ABS, drop tested (2 m / 6 1/2ft.)
Case dimensions approx. 470 x 400 x 195 mm
18 1/2" x 15 3/4" x 7 3/4"
Weight, including
all standard parts
only about 6.8 kg / 15.2 lb.
Options
Intrinsic safety EEx ib IIC T4
Certificate number TÜV 01 ATEX 1730