Atec Olympus-Magna-Mike_8600 - Manual (Page 4)

www.olympus-ims.com
is ISO 9001 and 14001 certified
*All specifications are subject to change without notice.
All brands are trademarks or registered trademarks of their respective owners and third party entities.
Copyright © 2013 by Olympus NDT.
MagnaMike8600_EN_201301 • Printed in the USA • P/N: 920-254-EN Rev. F
48 Woerd Avenue, Waltham, MA 02453, USA, Tel.: (1) 781-419-3900
12569 Gulf Freeway, Houston, TX 77034, USA, Tel.: (1) 281-922-9300
505, boul. du Parc-Technologique, Québec (Québec) G1P 4S9, Tel.: (1) 418-872-1155
1109 78 Ave, Edmonton (Alberta) T6P 1L8
For enquiries - contact
www.olympus-ims.com/contact-us
Standard Inclusions
Select probe and stand (straight or right angle):
• 86PR-1 (U8470020): Straight probe
includes 86PRS1 (U8771043): Two-part probe
stand
• 86PR-2 (U8470028): Right angle probe
includes 86PRS2 (U8771044): Two-part right
angle probe stand
• 86PC (U8801410): Probe cable for 86PR-1 and
86PR-2
• WinXL (U8774010): Interface program to Excel
Select one from:
• 86ACC-KIT (U8771068): Standard calibration kit
or 86ACC-ER-KIT (U8771069): Extended range
calibration kit
• EP-MCA: External power supply with charger
• 8600-MAN-CD (U8778535): CD with manual
(all languages)
• 600-TC (U8780294): Plastic carry case
Select one from:
• 600-C-RS232-5 (U8780299): RS-232 cable
• EPLTC-C-USB-A-6 (U8840031): USB cable
Standard inclusions may vary depending on your location.
Contact your local distributor.
Optional Accessories
• 600-C-VGA-5 (U8780298): VGA output cable
• 600-BAT-L (U8760056): Rechargeable
lithium-ion battery
• 85FSW (U8780127): Remote footswitch
• 86PR-2 (U8470028): Right angle probe
• 86PRS2 (U8771044): Two-part probe stand for
86PR-2
• 86PCC (U8780323): Coiled cable for 86PR-1
and 86PR-2
• 86PR1-WC (U8780324): Replaceable wear
cap for 86PR-1 and 86PR-2 probes
• 86PR1-CWC (U8780326): Chisel tip wear cap
for 86PR-1 and 86PR-2 probes
• 80TB1 (U8771030): Target balls 1.58 mm
(1/16 in.)
• 80TB2 (U8771031): Target balls 3.17 mm (1/8 in.)
• 80TB3 (U8771032): Target balls 4.76 mm
(3/16 in.)
• 80TB4 (U8771022): Target balls 6.35 mm (1/4 in.)
• 80TD1 (U8771034): Target disk Flat edge
• 80TD2 (U8771035): Target disk V-edge
• 86TBM3 (U8771039): Magnetic target balls
4.76 mm (3/16 in.)
• 86TBM4 (U8771040): Magnetic target balls
6.35 mm (1/4 in.)
• 86TW1 (U8771041): Wire target 1.14 mm
(0.045 in.)
• 86ACC-ER-KIT (U8771069): Extended
calibration kit
• 86ACC-W-KIT (U8771070): Wire target
calibration kit
• 86ACC-D-KIT (U8771071): Target disk
calibration kit
• 80CAL-NIS (U8771011): NIST-traced calibration
standards (set of six)
Magna-Mike ® 8600 Specifications *
GENERAL
Overall dimension 236 mm x 167 mm x 70 mm
(9.3 in. x 6.57 in. x 2.76 in.)
Weight 1.68 kg (3.72 lb), including lithium-ion battery
Keypad English, Japanese, Chinese, International
Languages English, Spanish, French, German, Japanese,
Chinese, Portuguese, Swedish, Norwegian,
Dutch, Polish, Russian, Hungarian, Czech,
Italian
Data storage Onboard and removable 2 GB MicroSD card
Battery life (Optional) 12 h to 13 h (lithium-ion),
Power requirements AC Mains: 100 VAC to120 VAC, 200 VAC to
240 VAC
Display type Full VGA (640 x 480 pixels) transflective
color LCD
Display dimensions (W x H, Diag.) 117 mm x 89 mm, 146 mm
(4.62 in. x 3.49 in., 5.76 in.)
Min/Max capture mode Captured at 60 Hz measurement rate
Display update rate 4, 8, 16 and 20 Hz
Alarm High and Low alarms
Resolution 0.1 mm (0.01 in.), 0.01 mm (0.001 in.),
0.001 mm (0.0001 in.) (depending on
thickness range)
Data logger Internal file-based alphanumeric data logger
PROBES
86PR-1 Standard straight probe 82.30 mm (3.24 in.)
long and 18.62 mm (0.733 in.) dia.
86PR-2 Right angle probe head 58.84 mm x 18.62 mm,
length 178.57 mm (2.32 in. x 0.733 in. dia.,
length 7.030 in.)
ENvIRONMENTAL TESTING
vibration MIL-STD-810G, Method 514.6, Procedure I
Drop MIL-STD-810G, Method 516.6, Procedure IV
Shock MIL-STD-810G, Method 516.6, Procedure I
Designed for IP67 Yes
INPuTS/OuTPuTS
uSB USB 2.0 peripheral port
RS-232 Yes
Memory card Maximum capacity: 2 GB removable
MicroSD memory card
video output VGA output standard
Foot switch (optional) Programmable (Save, Send, Meas or Q-Cal)
Operation temperature –10 °C to 50 °C (14 °F to 122 °F)