Atec Olympus-Magna-Mike_8600 - Manual (Page 2)

2
Strip chart view with statistics
The New Magna-Mike
The Magna-Mike ® 8600 is a portable thickness gage that uses a simple magnetic
method to make reliable and repeatable measurements on nonferrous materials.
Operation of the Magna-Mike is very simple. Measurements are made when its
magnetic probe is held or scanned on one side of the test material and a small
target ball (or Disk or Wire) is placed on the opposite side or dropped inside a
container. The probe’s Hall Effect sensor measures the distance between the
probe tip and target ball. The measurements are instantly displayed as an
easy-to-read digital thickness reading.
Two New Probe Design with Replaceable Wear Caps
The Magna-Mike is available with both straight and angled magnetic probes
that feature replaceable wear caps to extend the probe’s durability and reduce
replacement costs.
Measures from 0.001 mm (0.0001 in.) to 25.4 mm (1 in.)
The Magna-Mike offers an expanded list of target options (six different target balls,
two target disks and a wire target) to greatly extend its measurement capability.
Removable Standard Wear Cap Removable Chisel Tip Wear Cap
Targets Min Thickness Max Thickness
Accuracy
Basic Calibration Multipoint
1/16 in. (1.58 mm) ball (80TB1) 0.0001 in. (0.001 mm) 0.080 in. (2.03 mm) 4% 3%
1/8 in. (3.17 mm) ball (80TB2) 0.0001 in. (0.001 mm) 0.240 in. (6.1 mm) 4% 2%
3/16 in. (4.76 mm) ball (80TB3) 0.0001 in. (0.001 mm) 0.360 in. (9.1 mm) 3% 1%
1/4 in. (6.35 mm) ball (80TB4) 0.0001 in. (0.001 mm) 0.360 in. (9.1 mm) 3% 1%
New 3/16 in. (4.76 mm) magnetic ball (86TBM3) 0.160 in. (4.06 mm) 0.750 in. (19.05 mm) 3% 1%
New 1/4 in. (6.35 mm) magnetic ball (86TBM4) 0.160 in. (4.06 mm) 1.00 in. (25.4 mm) 3% 1%
0.500 in. (12.7 mm) flat disk (80TD1) 0.0001 in. (0.001 mm) 0.360 in. (9.1 mm) 3% 2%
0.250 in. (6.35 mm) V-edge disk (80TD2) 0.0001 in. (0.001 mm) 0.240 in. (6.1 mm) 3% 2%
New 0.045 in. (1.14 mm) dia. wire (86TW1) 0.0001 in. (0.001 mm) 0.500 in. (12.7 mm) 3% 2%
Note: Measurement tolerance = +/– [(accuracy x thickness) +0.0001 in.]
Measurement tolerance = +/– [(accuracy x thickness) +0.003 mm]
New Features:
• Two new durable probe designs:
- Straight and Right Angle
• Replaceable Wear Caps
- Standard and Chisel tip
• Expanded target selection
- 3/16 and 1/4 in. magnetic target balls
- Wire target
• Expanded thickness range up to
25.4 mm (1.00 in.)
• Larger Color VGA display
• RS-232, USB and VGA outputs
• Fast Measurement update rate 60 Hz
• Programmable instrument lock
with password
• Designed for IP67 rating
• Expanded alphanumeric data logger
• Save and Recall stored calibration files
• New bench style case with improved
gage stand
• Ability to export file to MicroSD card in
.txt and CSV formats
• New accessory kits (Calibration kits)
- Standard up to 9.1 mm (0.360 in.)
- Extended range up to 25.4 mm (1 in.)
- Disk kit
- Wire target kit
• Strip Chart view