Epoch 600 specifications, Software options, Optional accessories – Atec Panametrics-Olympus-Epoch-600 User Manual
Page 8: General, Pulser, Receiver, Calibration, Gates, Measurements
48 Woerd Avenue, Waltham, MA 02453, USA, Tel.: (1) 781-419-3900
12569 Gulf Freeway, Houston, TX 77034, USA, Tel.: (1) 281-922-9300
505, boul. du Parc-Technologique, Québec (Québec) G1P 4S9, Tel.: (1) 418-872-1155
1109 78 Ave, Edmonton (Alberta) T6P 1L8
EPOCH600_EN_201204 • Printed in the USA • Copyright © 2012 by Olympus NDT.
*All specifications are subject to change without notice.
All brands are trademarks or registered trademarks of their respective owners and third party entities.
www.olympus-ims.com
is ISO 9001 and 14001 certified.
EPOCH 600 Specifications*
Software Options
EP600-AWS (U8140147):
AWS D1.1/D1.5 Weld Rating
EP600-TEMPLATE (U8140148):
Template Storage
EP600-API5UE (U8140149):
API 5UE Flaw Sizing
EP600-XDATA (U8140150):
Expanded Data Logger File Types
EP600-AVERAGE (U8140151):
Waveform Averaging
EP600-IG (U8140153):
Interface Gate
Optional Accessories
600-BAT-L (U8760056): Rechargeable
lithium-ion battery
600-BAT-AA (U8780295): AA battery tray
EP4/CH (U8140055): Chest harness
600-TC (U8780294): Transport case
EPLTC-C-USB-A-6 (U8840031):
USB host cable to PC
600-C-RS232-5 (U8780299):
RS232 communication cable
EP1000-C-9OUT-6 (U8779017):
Alarm output cable
600-C-VGA-5 (U8780298):
VGA output cable
MICROSD-ADP-2GB (U8779307):
2 GB MicroSD memory card
General
Overall dimensions (W x H x D)
236 mm x 167 mm x 70 mm (9.3 in. x 6.57 in. x 2.76 in.)
Weight
1.68 kg (3.72 lb), including lithium-ion battery
Keypad
English, International, Japanese, Chinese
Languages
English, Spanish, French, German, Japanese, Chinese, Portuguese
Transducer connections
BNC or Number 1 LEMO
Data storage
50,000 IDs onboard, removable 2 GB MicroSD card (standard)
Battery type
Single lithium-ion rechargeable standard
Battery life
12 h to 13 h (lithium-ion), 3 h (alkaline)
Power requirements
AC Mains: 100 VAC to120 VAC, 200 VAC to240 VAC, 50 Hz to 60 Hz
Display type
Full VGA (640 x 480 pixels) transflective color LCD, 60 Hz update rate
Display dimensions (W x H, Diag.)
117 mm x 89 mm, 146 mm (4.62 in. x 3.49 in., 5.76 in.)
Pulser
Pulser
Tunable Square Wave
PRF
10 Hz to 2000 Hz in 10 Hz increments
Energy settings
100 V, 200 V, 300 V or 400 V
Pulse width
Adjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare
™
technology
Damping
50, 100, 200, 400 Ω
Receiver
Gain
0 to 110 dB
Maximum input signal
20 V p-p
Receiver input impedance
400 Ω ± 5%
Receiver bandwidth
0.2 MHz to 26.5 MHz at –3 dB
Digital filter settings
Eight digital filter sets standard (0.2-10 MHz, 2.0-21.5 MHz, 8.0-26.5 MHz,
0.5-4 MHz, 0.2-1.2 MHz, 1.5-8.5 MHz, 5-15 MHz, DC-10 MHz)
Rectification
Full-wave, Positive Half-wave, Negative Half-wave, RF
System linearity
Horizontal : ± 0.2% FSW
Resolution
0.25% FSH, amplifier accuracy ± 1dB
Reject
0 to 80% FSH with Visual Warning
Amplitude measurement
0 to 110% full screen height with 0.25% resolution
Measurement rate
Equivalent to PRF in all modes
Calibration
Automated calibration
Velocity, Zero Offset
Straight Beam (First Backwall or Echo-to-Echo)
Angle Beam (Soundpath or Depth)
Test modes
Pulse Echo, Dual, or Through Transmission
Units
Millimeters, inches, or microseconds
Range
3.36 mm to 13,405 mm (0.132 in. to 527 in.) @ 5,900 m/s (0.2320 in./µs)
Velocity
635 m/s to 15240 m/s (0.0250 in./µs to 0.6000 in./µs)
Zero offset
0 to 750 µs
Display delay
–59 mm to 13401 mm (–2.323 in. to 527.6 in.) @ longitudinal velocity in steel
Refracted angle
0° to 85° in 0.1° increments
Gates
Measurement gates
2 fully independent gates for amplitude and TOF measurements
Gate start
Variable over entire displayed range
Gate width
Variable from Gate Start to end of displayed range
Gate height
Variable from 2 to 95% full screen height
Alarms
Positive and Negative Threshold, Minimum Depth (Gate 1 and Gate 2)
Measurements
Measurement display locations
5 locations available (manual or auto selection)
Gate (1, 2)
Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight,
Min./Max. Depth, Min./Max. Amplitude
Echo-to-Echo
Standard Gate 2-Gate 1, Optional IF Gate Tracking
Other measurements
Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for
DGS/AVG, AWS D1.1/D1.5 rating (D), Reject Value
DAC/TVG
Standard
DAC points
Up to 50 points, 110 dB dynamic range
Special DAC modes
Custom DAC (up to 6 curves)
Curved surface correction
Standard OD or Bar correction for Angle Beam measurements