Atec Haefely-PSURGE-30-2 User Manual
Page 3
Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland
+ 41 61 373 41 11
+ 41 61 373 45 99
Locate your local
sales representative at
www.haefelyEMC.com
North American Office
Hipotronics Inc.
Haefely EMC Division
1650 Route 22
Brewster, NY 10509
++1 845 279 3644 x264
++1 845 279 2467
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice.
PSURGE30_FPSURGE3010_2006-05-29.doc
Coupling and decoupling network FP-SURGE 3010
Impulse shape
Combination wave only
Imp. amplitude
30kV / 15kA
EUT line voltage
480V AC
110V DC
Coupling modes
Line to neutral
Line or neutral to ground
Line and neutral to ground
EUT current
10A
Coupling capacitors
2x9uF / 1x18uF
Test cabinet
40 x 40 x 80 cm
(W x D x H)
Residual voltage at
EUT line input
15% of the applied test voltage,
limited to approx. 1200V
Weights and Dimensions (W x D x H, net weight)
FP-SURGE 3010 60 x 100 x 190 cm
approx. 250 kg
PSURGE 30.2 System Ordering Information
PSURGE 30.2 Mainframe
including users manual, mains cable (country specific),
warning lamp, emergency stop switch
Art. No. 249320
PS30-CW combination wave module
Art. No. 249321
PS30-8x20 current impulse module 8/20us
Art. No. 249322
PS30-10x350 current impulse module 10/350us
Art. No. 249323
PS30-10x1000 current impulse module 10/1000us
Art. No. 249324
FP-SURGE 3010 Single phase CDN
including users manual, mains cable (country specific),
cable set, cables to connect PSURGE 30.2
Art. No. 249452
Options and Accessories
EUT-OPT.1
Optical fiber for EUT failed input
Art. No. 249449
P90-Opt.2
Optical fiber link for RS-232. Needed
for remote control of the PSURGE
30.2.
Art. No. 249225
WinPATS
Control and reporting software. Runs
under Windows 98
Art. No. 249309
Impulse module back pack
Impulse display and monitor outputs