Atec Haefely-PSURGE-30-2 - Manual (Page 2)

Technical Specifications
PSURGE 30.2 Mainframe
Charging voltage range 3...33kV Test cabinet 39 x 29 x 32 cm (W x D x H)
Capacitors 9uF / 36uF HV switch triggered spark gap
Stored energy 5kJ at max. charging
voltage Impulse polarity positive, negative,
alternating
HV output terminals inside the test
cabinet Impulse circuit floating, max. voltage
between common and
ground 500V AC
Power mains 208, 230 or 240V
50/60Hz, 1800VA External synchronisation 0°....360° in 1° steps
Weights and Dimensions (W x D x H, net weight)
PSURGE 30.2 60 x 100 x 190 cm approx. 320 kg
Impulse Module PS30-CW
Impulse type Combination wave Output impedance 2 Ohm
Voltage front time 1.2us
±
30% Current front time 8us
±
20%
Voltage decay time 50us
±
20% Current decay time 20us
±
20%
Voltage undershoot ≤ 30% Current undershoot ≤ 30%
Voltage amplitude range 3...30kV Current amplitude range 1.5...15kA
Impulse repetition up to 6 impulses per
minute at max. voltage
Impulse Module PS30-8x20
Impulse type current Output impedance 0.5 Ohm
Voltage front time not defined Current front time 8us ± 20%
Voltage decay time not defined Current decay time 20us ± 20%
Undershoot not defined Undershoot ≤ 20%
Charging voltage range 3...15kV Current amplitude range 6...30kA
Impulse repetition up to 2 impulses per
minute at max. current
Impulse Module PS30-10x350
Impulse type current Output impedance 12 Ohm
Voltage front time not defined Current front time 10us
±
20%
Voltage decay time not defined Current decay time 350us
±
20%
Charging voltage range 3...15kV Current amplitude range 240...1200A
Impulse repetition up to 2 impulses per
minute at max. current
Impulse Module PS30-10x1000
Impulse type current Output impedance 37 Ohm
Voltage front time not defined Current front time 10us
±
20%
Voltage decay time not defined Current decay time 1000us
±
20%
Charging voltage range 3...15kV Current amplitude range 80...400A
Impulse repetition up to 2 impulses per
minute at max. current