Atec Haefely-PEFT-8010 User Manual
Page 4
Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland
+ 41 61 373 41 11
+ 41 61 373 45 99
Locate your local
sales representative at
www.haefelyEMC.com
North American Office
Hipotronics Inc.
Haefely EMC Division
1650 Route 22
Brewster, NY 10509
++1 845 279 3644 x264
++1 845 279 2467
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice.
PEFT8010_2006-11-28.doc
S c o p e of S u p pl y
PEFT 8010 instrument including
all cables, user manual and
calibration certificate
Art. No. 249180
A c c es s o ri es a n d O p ti o ns
Ordering Information
Ordering Number
FP-EFT 32.1 is a fully automatic three phase 32A, 690V/400V CDN. Coupling path selection
is controlled from the PEFT 8010.
249253
FP-EFT 32M is manual three phase 32A, 690V/400V CDN. Coupling path selection is manual.
249017
FP-EFT 100M is a manual three phase CDN for operation up to 100A, 690V/400V.
249586
IP4A is a capacitive coupling clamp for superposition of burst on data lines in accordance
with IEC 61000-4-4, edition 1 and 2.
249130
PAT 14 is an attenuator with division factor 5 (14dB). Allows to reach the lower levels
required in IEC 61000-4-4 with external CDNs.
249948
Easy Control hand held remote control unit used to start, stop or load tests and programs
from the PEFT 8010 memory.
249602
Vertical Operation Stand mounts the PEFT 8010 vertically for easy access while the
instrument stands on a floor level ground plane.
249735
E and H Field Generation Probes set can be used to inject near fields and to find
electromagnetic sensitive areas in a test object.
249608
WinFEAT&R control software for remote operation, data logging and analysis
(FEAT&R = Fast, Easy, Accurate Testing & Reporting
).
249970
IEEE-488 Interface P95 IEEE card
249556
OPTICAL DEC95 RS-232 optical link for a galvanic isolation between PEFT 8010 and PC.
249689
EUT-OPT.1 optical link for electrical decoupling of the EUT failed input.
249449
AC Adapter Set for country specific power plug (B, CH, US).
249200
AC Adapter Schuko-UK converts Euro to UK plugs (13A, 250V).
249739
DC Adapter Set for DC applications.
249733
EFT Verification Set for verifying the HV output with 50Ω and 1000Ω load (U max. 8kV)
249995
Adapter Verification for wave shape verification at the line output of the PEFT 8010.
249603
Fiber Optic Interface for connecting the PESD 1610 with the PEFT 8010 mainframe.
249667
Warning Lamp
249944
Emergency Stop Switch
249945
Picture shows: vertical mounted
PEFT 8010 with Field Generation
Probes, Coax Cables, PESD 1610,
Easy Control and Verification Kit.