Atec Haefely-FP-COMB32 - Manual

1 / 2
1 / 2
FP-COMB 32
COMBINED AUTOMATIC 3-PHASE COUPLING / DECOUPLING NETWORK
 The FP-COMB 32 coupling/decoupling network – for
Surge Combination Wave, Ring Wave and EFT/Burst –
is fully compliant with the standard requirements of
IEC/EN 61000-4-4, IEC/EN 61000-4-5 and IEC/EN
61000-4-12.
The FP-COMB 32 is controlled by the AXOS
5
/ AXOS
8
expandable immunity test system(s). The CDN
automatically changes the coupling paths, phase
angles and source impedance based on test
parameters set by the user via the AXOS controller
–
depending on the standard and coupling mode.
The FP-COMB 32 was designed to reduce residual
voltage levels at the EUT mains input by integrating the
proper decoupling inductors for each type of CDN
application in order to meet the requirements (with
regard to voltage drop at the rated current). Apart from
covering the EN/IEC 61000-4-5 standard, the FP-
COMB 32 also covers tests to meet surge
requirements outlined in ANSI/IEEE C62.41.
FEATURES

Surge Combination Wave, 1.2/50us - 8/20us

Ring Wave, 100kHz

Electrical Fast Transient (EFT) / Burst

7kV impulse voltage for Surge Combination Wave
and Ring Wave

5kV impulse voltage for EFT/Burst

Line voltage 480V AC / DC phase-to-phase

32A EUT current per phase

Phase angle synchronization for each path
BENEFITS

Combined CDN for Surge Combination Wave,
Ring Wave and EFT/Burst

LEDs indicate active mode and coupling path

Automatic selection of Surge impedance

Fully remote controlled by AXOS
5
/ AXOS
8
APPLICATIONS

Single & three phase power line systems

IEC 61000-4-4 Edition 3

IEC 61000-4-5 Edition 3

IEC 61000-4-12

ANSI C62.41 & C62.45 power lines

Many IEC & EN product standards
SSSCOPE OF SUPPLY (ARTICLE NO. 2490430)
Qty. 1 FP-COMB 32
Qty. 1 AC mains cable country specific
Qty. 1 EUT mains cable 32A
Qty. 1 EUT mains adapter 32A
Qty. 1 Calibration certificate
Qty. 1 Surge cable to AXOS
Qty. 1 EFT/Burst cable to AXOS
Qty. 1 User ’s manual