Atec Haefely-IP4A User Manual

Page 4

Haefely EMC Technology - product catalogue - eft

http://www.haefelyemc.com/product_catalogue/eft/index.html[9/24/2012 11:10:33 AM]

Remote Control Unit

When PEFT 4010 is operated on a floor mounted Ground
Reference Plane, access to the instrument front panel may not
be so convenient. The Easy Control, enables use of the PEFT
4010 when the instrument front panel is not visible or
inconveniently placed.

Field Probes - Near field injection probes

E and H field generation probes set. Used for development and
diagnostic to generate interference fields into your test object to
find sensitive areas.
(powered by PEFT4010 output)

Field Probes - Scan EM probes ("Sniffer")

Set of two high sensitive probes for the detection of electric and
magnetic fields. Used for product development and diagnostic.

External Warning Lamp

Connected to any generator, the additional, stand-alone widely
seen warning lamp indicates clearly the status of the test
equipment by red & green lights.

External Emergency Stop Switch

Connected to any generator, the EMERGENCY STOP SWITCH,
when activated instantly discharges high voltage circuits and
switches off power to the EUT.

Verification Adaptor

To verify and measure the PEFT4010 output wave shape. Adaptor from SCHUKO connector to high
voltage BNC connectors. Used together with the measurement attenuators.

Optical DEC95 - Optical link for RS232

10m optical link cable for RS232 connection of the PEFT 4010 to an external PC. Complete electrical
decoupling to prevent external disturbances or coupling into the PC.

terms

| updated