Atec Haefely-IP4A - Manual (Page 3)

Haefely EMC Technology - product catalogue - eft
http://www.haefelyemc.com/product_catalogue/eft/index.html[9/24/2012 11:10:33 AM]
Decoupling Network for operation up to 100A for AC & DC
test object power line voltage max.690Vac
test object power line voltage max.110Vdc
test object current max. 100A per phase
manual coupling path selection
meets IEC and ANSI coupling requirements
maximum EFT voltage 8kV
integrated network to protect EFT generator
EFT Verification Attenuator Set
According to the latest changes in the IEC/EN 61000-4-4 edition
2 standard, which is mandatory since October 2007, verification
of the burst waveform is required through a 50 and 1000 ohm
load.
The Haefely EMC EFT Verification set includes all neccessary
attenuators and additional cabling and documentation, that
allow users to connect to comercial oscilloscopes and verify the
waveshape as required by the latest standard. To verify
impulses at the CDN output, special adapters can be used
together with the attenuators.
.
WinFEAT&R Software
The WinFEAT&R software is the latest generation of control and
reporting software, based on a modern Drag and Drop
concept, which offers such simplicity of use, that even users
with minimum technical experience, will by carrying out tests in
no time.
This unique software allows users to run user specified or pre-
defined tests according to the latest standards, and monitors
and displays real time output current and voltage values. The
software runs under all latest Microsoft Windows versions and is
compatible with all stand alone Haefely EMC test generators.
IEEE 488 interface
GPIB interface board for the PEFT4010 mainframe
Fiber optic interface
Fiber optic interface / RS232 converter used to connect the
ONYX ESD simulator with PEFT4010 mainframe
ONYX - ESD simulator
For more information see in the ESD (electrostatic discharge
testers) product line.
Real Burst
Additional circuit boards can be fitted to the PEFT 4010,
enabling it to produce burst packets as they occur in reality, that
is with simultaneously varying frequency and amplitudes. Two
frequency options can be added, 5KHz and 100KHz.