Atec Frankonia-RIS-3000 - Manual

Immunity Test System RIS 3000 / RIS 6000
Description
The setup of a radiated immunity test system can be done in the conventional way with many separate instruments or in a more comfortable
and less risky way with our new EMC control unit, type ECU-3/-6 (please find a detailed description on pages 9 - 13).
In both ways the components which are needed for such a system are in principle the same:
Diagram no. 1
Conventional setup of a radiated immunity test system acc. to IEC/EN 61000-4-3 by means of separate instruments.
EUT
Antenna 2
MAX-9
Antenna 1
AXL-80
RSU
Amplifier 2
Amplifier 3
Amplifier 1 Relay 1 Relay 2
USB/RS232
incl. Control Software
CR-LAB
EFS-10/-100
FLH/FLL/FLG
FLH/FLL/FLG
FLH/FLL/FLG
EUT-monitoring
GPIB
Relay 4
RSU USB
max.
107 dBµV
107 dBµV
107 dBµV
500W
max.
max.
Relay 3
RSU
PC
Relay 5
Directional
Coupler DC1
PMS 1084
RF-Power Meter
Channel 1
PMS 1084
RF-Power Meter
Channel 2
DC2
DC3
Anechoic Chamber
Distance: 3.0 m Height: 1.55 m
Field Strength Meter
Signal Generator
Device 1 Device 2 Device 3 Device 4
RSU
RSU
max.
Antenna(s)
RF-Field Strength Meter
Set of RF-Cables
Control PC and
Control Software
Signal Generator
RF-Power Amplifier(s)
Directional Coupler(s)
RF-Power Meter
acc. to IEC/EN 61000-4-3
3 // PAGE