Atec HiloTester-CE-Tester - Manual (Page 2)

Technical specifications subject to change, CE_TESTE_3G.DOC, 10/12 Page 2/3
HILO-TEST GmbH, Am Hasenbiel 42, D-76297 Stutensee-Karlsruhe, Tel. 07244/20500-0, www.hilo-test.de
Optionally the CE-TESTER can include a trigger able power supply switch which allows the
simulation of the voltage dips as specified in the standard IEC 61000-4-11. The variation of
power supply voltage is controlled by use of an external motor driven variac. The control of
the external power source is included in the mainframe.
An Induction Coil in conjunction with the Combination Wave Generator output, is used to
simulate pulsed magnetic fields according to IEC 61000-4-9. Combined with the external
power source, the Induction Coil can be used to simulate power frequency magnetic fields
according to IEC 61000-4-8.
Additional Coupling-/Decoupling Networks covering three-phase power supply lines, DC
supply lines and signal lines are also available, as well as a Capacitive Coupling Clamp for
coupling to shielded interconnection lines.
The CE-TESTER excels by its compact design, simple handling and precise reproducibility of
test impulses. It features a microprocessor controlled user interface and a 5” touch screen
unit for ease of use. The microprocessor allows the user to execute either standard test
routines or a “user defined ” test sequence. A standard USB port provides the ability to print a
summary of the test parameters to a USB stick.
The software program CE-REMOTE allows full remote control of the test generator via
Ethernet light guide as well as documentation and evaluation of test results, accordingly to
the IEC 17025. To record definite impulses, it is equipped with an Impulse Recording
Function (IRF)
Moreover all generator functions including the built-in Coupling-/Decoupling Network, may be
computer controlled via the isolated optical interface.