Atec Haefely-PSURGE8000 - Manual (Page 2)

Hardware Concept
M O D U L A R I T Y
Modularity
The Surge Platform hardware comprises a control unit
with access to maximum 99 modules interconnected
on the HAEFELY BUS.
An innovative platform concept can help reduce time
to market and provide a high degree of future
proofing against changing standards or new
applications.
Also included in the host controller is the system’s
high voltage DC supply, which is distributed
between impulse modules (PIMxxx) using a safety
interlocked bus system. Up to 99 modules in any
combination can be controlled from just one PSURGE
8000 control unit, ranging from a stand-alone single
impulse generator to a complete and fully automated
test system
Modules are application-specific and can include
impulse units or coupling units in any combination.
This is possible through the use of distributed
intelligence. Each module contains information
stored in non-volatile memory which the control
unit interprets and uses as the basis for test
templates. This concept leaves an opening for
future expansions of the system without having to
modify the controller, a true PLATFORM concept.
Flexibility can be enhanced by use of the REMOTE
USER INTERFACE software. This opens
opportunities for integration into manufacturing
and quality systems. Access to process interfaces
means that the system can also make
measurements on the EUT and control other
remote applications either based on EUT function
or status.
Single Connect Solutions
Eliminate reconnection errors, reduce down time. The
Single Connect solution performs tests to AC/DC
power, telecom and 1/0 ports simultaneously without
having to power down or reboot the EUT. Switching
between all required impulse types and coupling
paths - without having to reconnect or reconfigure
hardware. Reduced operator intervention increases
throughput. Fully automatic coupling path selection
through the power, Tip & Ring telecom and I/0 line
couplers plus waveform selection can all be
programmed either from the PSURGE 8000 front
panel controls or from the all new WinFEAT&R PC
based software package.
Applications
Industrial
CE Mark
Safety
Household
Component
Telecommunication