Atec keytek-mz30 - Manual (Page 2)

MZ-30 ESD Simulator
MZ-30 ESD Simulator Output Waveforms: IEC61000-4-2-Specified Waveforms and Test Levels
Simplified diagram of the ESD generator
Typical waveform of the output current of the ESD generator
Waveform Parameters
Cs: Energy-storage capacitor V: Output voltage
Rd: Discharge resistor Rc: Charging resistor
Output Current Waveform - MZ-30 (Level 1)
Specifications
Rise Time
Magnification
200ps/div
2A/div
Entire Waveform
10ns/div
2A/div
Test Levels
Level Contact discharge test Air discharge test
1 2kV 2kV
2 4kV 4kV
3 6kV 8kV
4 8kV 15kV
X Special Special
Level Indicated First peak Rise time tr Current Current
voltage current of with (+/-30%) (+/-30%)
discharge discharge at 30 ns at 60 ns
+/- 10% switch
1 2kV 7.5A 0.7 to 1ns 4A 2A
2 4kV 15A 0.7 to 1ns 8A 4A
3 6kV 22.5A 0.7 to 1ns 12A 6A
4 8kV 30A 0.7 to 1ns 16A 8A
Item Specification
Discharge method Contact discharge and Air discharge
Set voltage 0.50kV to 30kV
Polarity Positive and Negative
Energy storage capacitor 150 pF +/- 10% (replaceable)
Discharge resistor 3301 +/- 10% (replaceable)
Charge resistor 50M1
Discharge interval 0.05 / 0.1s to 99.9s
Number of discharges 1 to 999 / Continuous
Trigger Main panel trigger and Discharge gun trigger
Discharge current waveform Compliant with the IEC61000-4-2 standard
Interface RS-232C (Option)
Power supply 100V to 240V AC (50Hz to 60Hz)
Standard Accessories
Product name Model name Quantity
CR Unit (150pF/3301) for EN/IEC61000-4-2 CR21 1
Air discharge tip for EN/IEC61000-4-2 AT21 1
Contact discharge tip for EN/IEC61000-4-2 CT21 1
Operation manual 1