Atec Narda-NBM-580 - Manual

91 narda Safety Test Solutions an communications company USA • Germany • Italy
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: [email protected] • www.narda-sts.us
Personal and Area Monitors
NBM-580 Broadband Radiation Meter
♦
Up to 8 Input Metering Station for
NBM Meters and/or NS3 Monitors
♦
Allows Central Control of Multiple
Field Sensors
♦
Built-in, Low and High Power Alarm Relays
♦
Touch Screen Controls
♦
Fiber Optic and USB Inputs
♦
IEEE-488 or Ethernet Connectivity
Description
The Narda NBM-580 allows users to combine multiple-sensor installations
into a fully functioning monitoring or alarm system. Configured as a single
communication point, this product allows complete control over sensors
that are stationed tens or hundreds of meters away from the metering
station. The built-in color, touch screen display can be user configured to
display individual readings of each sensor or the maximum, minimum or
average of one or more of the connected sensors. Programmable analog
voltage outputs can also be arranged to generate positive or negative go-
ing voltages, depending on detected fields. Digital TTL-levels can be tied
to alarm settings as well as two built-in high power relays.
Area Monitoring
Intelligent area monitoring is made possible by the NBM-580 and Nardalert
S3 (NS3) monitors. NS3 monitors can be placed strategically around high-
power test areas, powered by DC voltage and connected by fiber optic
cables back to the NBM-580. Levels detected by the monitors can be con-
tinuously compared to preset thresholds and generate immediate alarms