Atec Fluke-1630 User Manual
Fluke 1630, Technical data, Earth ground clamp meter
Technical Data
Fluke 1630
Earth Ground Clamp Meter
•
A wide ground loop resistance range, from 0.025 Ω to1500 Ω, to
satisfy all requirements
•
Large jaw opening of 35 mm (1.38 in) for tests on ground conductors
and/or equipotential bus bars
•
Measurement of ground leakage current, from 0.2 mA to 1000 mA,
without needing to disconnect - ideal for system troubleshooting
•
Wide ac current measurement range from 0.2 A to 30 A allows one
instrument for multiple applications
•
Continuity loop test - quickly assess whether resistance is less than
40 Ω, with audible alarm
•
User-defined HI / LO Alarm limits, for rapid measurement evaluation
•
Handy “Display-Hold” button for capturing readings in
hard-to-reach places
•
Time saving memory function automatically records and
stores measured values
•
Automatic self calibration ensures correct measurement every time
The clamp-on ground testing technique used by
the Fluke 1630 simplifies ground loop testing and
enables non-intrusive leakage current measurement.
The compact and rugged design makes the Fluke
1630 easy to use in small places and harsh environ-
ments, while the “Display-Hold” and the continuity test-
ing with an audible alarm function, ensures convenience
in use. The novel technique means that earth ground
loop testing and continuity testing can be completed
without breaking the circuit.
Earth Ground loop resistance measurements
for commercial, industrial, and utility applications