Atec Quadtech-6000-Plus - Manual

USES:
• Production and Compliance Testing of
Appliances, Instruments and Information
Technology Equipment in Accordance
with UL, CSA, IEC, TUV and Other
Standards such as EN60335, EN60950,
EN61010, CSA C22.2 No. 1010.1, UL3111
and UL60950
• Transformer Electrical Safety Testing
• Electric Motor Safety Testing
• Power Supply Safety Testing
• Verification of the Ground Connection on
Products with a Three Prong Power Cord
FEATURES:
• Twin Port - Simultaneous Hipot & GB
• Programmable Output Voltage to 5KV AC
and 6KV DC
• Ground Bond Testing to 30A AC (to 40A
with Optional Transformer)
• Insulation Resistance Measurements from
100kΩ to 50GΩ
• Open/Short Circuit Detection Mode
• Programmable Ramp, Dwell & Test Times
• Storage of 100 Test Setups, 50 Steps Each
• Continuous Leakage Current Monitoring
• Programmable Trip Current to 40mA AC
and 12mA DC
• Front Panel Lockout via Password
• Standard RS-232 & Remote I/O Interfaces
• Optional IEEE-488, Printer Interfaces
• Optional Built-in 8 Channel Scanner
• Optional CaptivATE Automation
Software for G6000 Plus
Introduction
The Guardian 6000 Plus is the industry’s first safety analyzer with simultaneous
Hipot and Ground Bond capability providing a dramatic savings in test time. Five
instruments in one, the G6000 Plus provides AC Hipot, DC Hipot, Insulation
Resistance, Ground Bond and Open/Short measurements from a single test con-
nection. Versatile and packed with features, the G6000 Plus is a cost effective
solution to the full spectrum of electrical safety compliance testing.
Description
AC Hipot: AC dielectric testing over the voltage range from 50V to 5000VAC RMS. The
maximum leakage current of 40mA RMS is ideal for testing devices with high leakage cur-
rents such as power supplies which have large filter or “Y” capacitors for noise reduction.
DC Hipot: DC dielectric testing from 50V to 6000VDC with a resolution of 1V. Leakage
current can be continuously monitored from 0.1µA to 12mA DC.
Insulation Resistance: The G6000 Plus is capable of measuring IR from 100k to 50GΩ
with test voltage from 50V to 1000VDC in 1V steps.
Quick Discharge: In both DC and IR modes, the device under test is discharged through
the HV transformer resulting in a rapid and safe discharge.
Ground Bond: With test current from 1A to 30A in 0.1A steps and programmable current
limits, test time, frequency and open circuit no load voltage, the G6000 Plus provides full
GB testing capability. The offset feature automatically compensates for any lead resist-
ance. A 40A GB option is also available.
Twin Port Technology: This patented feature allows for simultaneous Ground Bond and
Hipot Testing. Decrease test time and increase device through-put.
Open/Short Circuit Detection Mode: Check for Opens and Shorts against a standard
capacitance value, Cs, and have confidence the DUT is properly connected.
Optional Scanners: One internal and/or multiple external scanners may be added to the
G6000 Plus for testing multiple devices simultaneously. Add up to 8 HV channels or a
combination of HV and GB channels.
Standard Interfaces: The Remote I/O and RS-232 interfaces provide remote control and
serial data collection capability for automated applications.
Guardian 6000 Plus
with Revolutionary Twin Port Technology
Electrical Safety Analyzer
Hipot Testers • LCR Meters • Cable Testers • AC/DC Programmable Power Sources
• Megohmmeters • Milliohmmeters
For more detailed information on
specifications, pricing and special
purchase, rent and lease options,
contact us at:
www.quadtech.com
800-253-1230