Atec Hipotronics-100HVT Series User Manual
Page 2
100 HVT Front
Panel Layout
100 HVT-DS-2
JUNE 1996
For further information, contact:
Hipotronics, Inc.
A Subsidiary of Hubbell, Incorporated
Route 22, P. O. Box 414
Brewster, NY 10509, U.S.A.
1-800-727-4476
Tel: 845-279-8091
Fax: 845-279-2467
NOTE: Because Hipotronics has a policy of continuous product improvement, it
reserves the right to change design and specifications without notice.
SPECIFICATIONS
Model number suffix - A
120VAC, 60 Hz
Model number suffix - B
220VAC, 50/60 Hz
INPUT VOLTAGE
MODEL
OUTPUT
CURRENT METER
VOLTMETER
DUTY CYCLE
OUTPUT TERMINATION
METER ACCURACY
DISTORTION
CABLES
DIMENSIONS
NET WEIGHT
HV SECTION
CONTROLS
COMPLETE UNIT
SHIP WEIGHT
100HVT
100 kV @ 50 mA = 5 kVA/50 kV @ 100 mA = 5 kVA
Triple range 0 to 1/10/100 mA
Triple range 0 to 25/50/100 kV AC
5 minutes on, 15 minutes off, repeated 6 times, then off for 2 hours
High Voltage Toroid
± 2% of Full Range
Less than 5% of sinusoidal wave
25' (7.6 meters) Controller to HV Tank with Plug Connection
(2) 25' Shielded Cable for Return and Voltmeter
(2) 25' Guard/Ground Cable
10' (3 meters) Input Power Cable
17.4"W x 14.5"D x 31.9"H (441 x 368 x 810 mm)
135 lb (61 kg)
62 lb (28 kg)
240 lb (109 kg)
306 lb (139 kg)