Atec Megger-mct1605 - Manual (Page 4)

MCT1605
Multi-Tap Automatic Current Transformer Saturation,
Ratio and Polarity Test Set
SPECIFICATIONS
Input
100 to 265 V, 1ø, 50 or 60 Hz, 15 A max.
Output
Continuously variable in four ranges:
0 to 40 V at 2.0 A max (5 minute on 15 minute off)
0 to 40 V at 5 A max for burden test
0 to 160 V at 2.0 A max (5 minute on 15 minute off)
0 to 800 V at 1.5 A max (3 min on, 15 min off)
0 to 1600 V at 1.0 A max (3 min on, 15 min off)
Instrumentation
Voltmeters
Output
4
1 ⁄
2
digit, auto ranging
Resolution: 0.0000 to 1.9999/19.999/199.99/1999.9
Ranges: 0 to 40/160/800/1600 V
Accuracy: ±0.5% of reading, and ±.5% range typical
±1% of reading and ±1 V maximum
Input
4
1 ⁄
2
digit, auto-ranging
Ranges: 0 to 2/600
Resolution: 0.0000 to 1.9999/19.999/199.99/600 V
Accuracy
2 V Range: ±0.5% of reading and ±0.25% range
600 V Range: ±0.5% of reading and ±0.5% range
Ammeter
4 1 ⁄
2
digit
Range: 0.0000 to 1.0000A/5.000
Accuracy: ±0.85% of reading and ±1 LSD
Phase Angle
3 digits
Range: 0 to 360 degrees
Accuracy: ±1 degree*
Ratio
Range Accuracy
0.8 to 5000 ±0.4% typical
±0.8% maximum
Ratio Test Frequency
55Hz internally generated providing a universal 50/60Hz test set
Winding Resistance
Measuring Range: .01Ω to 99.9Ω
Accuracy: <9.99Ω ±3% of reading ±2 digits
< 99.9Ω ±5% of reading ±2 digits
Insulation Test
Test Voltage: 1000 VDC, 500 VDC
Measuring Range: 10kΩ – 999MΩ
Short Circuit Current: 1.5mA nominal
Test Current on Load: 1mA at min. pass values of insulation
(as specified in BS7671, HD 384 and IEC 364)
Accuracy: ±3%, ±2 digits up to 10MΩ
±5%, up to 100MΩ
±30% up to full scale
Communication Interfaces
Ethernet/USB
Environment
Operating: -10º C to 40º C
Storage: -30º C to 70º C
Enclosure
The unit is housed in a rugged enclosure suitable for use in
outdoor substations.
Standards
IEC 61010, CSA 22.2, CE
Dimensions
7.5” H X 19.25” W X 15” D
(190 H X 489 W X 940 D mm)
Weight
47.6 lb (21.6 kg)
*at nominal voltage
ISO STATEMENT
Registered to ISO 9001:2000 Cert. no. 510006.002
MCT1605_DS_en_V01
www.megger.com/us
Megger is a registered trademark
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
[email protected]
UNITED STATES
4271 Bronze Way
Dallas TX 75237-1019 USA
T 800 723 2861 (USA only)
T +1 214 333 3201
F +1 214 331 7399
[email protected]
OTHER TECHNICAL SALES OFFICES
Valley Forge USA, College Station USA,
Sydney AUSTRALIA, Täby SWEDEN,
Ontario CANADA, Trappes FRANCE,
Oberursel GERMANY, Aargau
SWITZERLAND, Kingdom of BAHRAIN,
Mumbai INDIA, Johannesburg SOUTH
AFRICA,
Chonburi THAILAND
Item (Qty) Cat. No.
MCT1605 Multi-Tap Automatic Current Transformer
Saturation, Ratio and Polarity Test Set
MCT1605
Included Accessories
Line cord, North American (1 ea) 620000
Line cord, International color coded wire (1 ea) 15065
Test lead, H1 & H2, 40 ft, (1 ea) 620148
Test lead, X red, 20 ft, (1 ea) 2000-753
Test lead, X green, 20 ft, (1 ea) 2000-747
Test lead, X yellow, 20 ft, (1 ea) 2000-748
Test lead, X blue, 20 ft, (1 ea) 2000-749
Test lead, X white, 20 ft, (1 ea) 2000-746
Ground lead, green with yellow,
with large ground clip, 20 ft, (1 ea)
620151
Large test clip, red, 40mm opening, (1 ea) 640266
Large test clip, black, 40mm opening, (1 ea) 640267
ORDERING INFORMATION
Item (Qty) Cat. No.
Alligator clip, red, 4.1mm, (1 ea) 684006
Alligator clip, white, 4.1mm, (1 ea) 90000-882
Alligator clip, green, 4.1mm, (1 ea) 90000-883
Alligator clip, yellow, 4.1mm, (1 ea) 90000-884
Alligator clip, blue, 4.1mm, (1 ea) 90000-885
Soft side lead case 90001-165
USB memory stick 830029
Ethernet crossover cable (1 ea) 620094
Instruction book 80513
PowerDB Lite DB0001
Optional Accessories
Printer USB, battery operated, (1 ea) 830030
PowerDB, 1 st copy with USB key DB1001S