Multimeter/data acquisition/ switch systems – Atec Keithley-2700 Series User Manual

Page 2

IGI

L M

S &

TEMS

A Greater Measure of Confidence

www.keithley.com

1.888.KEITHLEY

(U.S. only)

Install up to five input modules in the 2750 mainframe (or up to two in the 2700 and 2701

mainframes). all switch/control modules are fully enclosed in impact-resistant plastic for

exceptional ruggedness. Three connector alternatives simplify connecting the modules to DuTs.

rugged D-sub connectors allow quick, secure connections and are especially convenient when

performing routine maintenance or when the system is installed in a rack. IDC ribbon cable

adapters are supplied with the Model 7701, 7707, and 7709 modules for fast, uncomplicated

hookups in production test and process monitoring applications. oversize screw-terminal

connectors simplify setup in applications that require the greatest connection flexibility.

additional D-sub and IDC ribbon cable connector kits and pre-wired cable assemblies are

sold separately.

2701 in a point-to-point configuration, to multiple Model 2701s through a hub, or to multiple Model

2701s distributed on a network .
The Model 2701 Ethernet port uses the industry-standard TCP/IP socket interface . This provides data

rates up 100Mbits/sec . and allows the instrument to be located up to 100 meters from the nearest

computer or network hub in hardwired systems and miles in wireless Ethernet systems . The maxi-

mum distances between a control PC and the instruments are limited only by the size of the network .

The instrument also provides a built-in diagnostic Web page for easy remote access to the Model

2701 . Entering the instrument’s IP address in the URL line of Microsoft Internet Explorer will allow

communication with and control of the Model 2701 . This Web page allows users to read and set net-

work parameters, such as IP address, subnet mask, gateway, MAC address, and calibration dates, and

to send commands to and query data from the Model 2701 .

Temperature Capabilities
Integra Series mainframes support three major types of temperature sensors with built-in signal

conditioning and 300V isolation: thermocouples, RTDs, and thermistors . To begin using a sensor,

simply hook it up and the instrument does the rest . If a thermocouple is broken or disconnected,

the instrument will alert the operator . The mainframes also support three methods for cold-junction

compensation (CJC): automatic (built-in), external (built-in), and simulated .

ordering Information

2700

DMM, Data acquisition,

Datalogging system

w/2 slots

2701

DMM, Data acquisition,

Datalogging system

w/2 slots and

Ethernet support

2750

DMM, Data acquisition,

switching, Datalogging

system w/5 slots

accessories supplied

labVIEW, labWindows/ CVI, Visual

basic, and C/C++ drivers; manual;

and Model 1751 safety Test leads.

2700, 2701,

2750

Multimeter/Data Acquisition/

Switch Systems

sErVICEs aVaIlablE

2700-3Y-EW

1-year factory warranty extended to 3 years
from date of shipment

2701-3Y-EW

1-year factory warranty extended to 3 years
from date of shipment

2750-3Y-EW

1-year factory warranty extended to 3 years
from date of shipment

C/2700-3Y-ISO

3 (ISO-17025 accredited) calibrations within 3
years of purchase*

C/2701-3Y-ISO

3 (ISO-17025 accredited) calibrations within 3
years of purchase*

C/2750-3Y-ISO

3 (ISO-17025 accredited) calibrations within 3
years of purchase*

*Not available in all countries

aCCEssorIEs aVaIlablE

2750-321A

Extra slot cover

7007-1

Shielded IEEE-488 Cable, 1m (3 .3 ft .)
(Models 2700, 2750 only)

7007-2

Shielded IEEE-488 Cable, 2m (6 .6 ft .)
(Models 2700, 2750 only)

7788

50-Pin D-Shell Connector Kit (2 each)(for Models
7703, 7705 Modules w/D-sub Connectors)

7789

50-Pin/25-Pin D-Shell Kit (1 each)

7790

50-Pin Male, 50-Pin Female, and 25-Pin Male IDC
D-Shell Connector Kit (1 each) (Ribbon Cable
not Included)

7797

Calibration Extender Board (for Model 2750)

7705-MTC-2 50-Pin Male to Female D-Sub Cable, 2m
7707-MTC-2 25-Pin Male to Female D-Sub Cable, 2m
KPCI-488LPA IEEE-488 Interface/Controller for the PCI Bus

(Models 2700, 2750 only)

KUSB-488B IEEE-488 USB-to-GPIB Interface Adapter (Models

2700, 2750 only)

TYPICal aPPlICaTIoNs
• Production test of electronic

products and devices

• accelerated stress testing (asT)
• Process monitor and control
• Device characterization/r&D
• low ohms, multichannel

measurements

a S

s i

nte

ate

d s

itc

, m

sure

t, a

ion

a S

s i

nte

ate

d s

itc

, m

sure

t, a

ion