Atec EXFO-FTB-8115 - Manual (Page 9)

FTB-8115
SONET/SDH Test Module
2008
EXFO is certified ISO 9001 and attests to the quality of these products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no responsibility for
any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices. In addition, all of EXFO’s manufactured
products are compliant with the European Union’s WEEE directive. For more information, please visit
www.EXFO.com/recycle . Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at http://www.EXFO.com/specs
In case of discrepancy, the Web version takes precedence over any printed literature.
EXFO Corporate Headquarters > 400 Godin Avenue, Quebec City (Quebec) G1M 2K2 CANADA | Tel.: +1 418 683-0211 | Fax: +1 418 683-2170 | [email protected]
Toll-free: +1 800 663-3936 (USA and Canada) | www.EXFO.com
EXFO America 3400 Waterview Parkway, Suite 100 Richardson, TX 75080 USA Tel.: +1 972 761-9271 Fax: +1 972 761-9067
EXFO Asia 100 Beach Road, #22-01/03 Shaw Tower SINGAPORE 189702 Tel.: +65 6333 8241 Fax: +65 6333 8242
EXFO China 36 North, 3 rd Ring Road East, Dongcheng District Beijing 100013 P. R. CHINA Tel.: + 86 10 5825 7755 Fax: +86 10 5825 7722
Room 1207, Tower C, Global Trade Center
EXFO Europe Omega Enterprise Park, Electron Way Chandlers Ford, Hampshire S053 4SE ENGLAND Tel.: +44 23 8024 6810 Fax: +44 23 8024 6801
EXFO Finland Elektroniikkatie 2 FI-90590 Oulu, FINLAND Tel.: +358 (0)403 010 300 Fax: +358 (0)8 564 5203
EXFO Service Assurance 270 Billerica Road Chelmsford, MA 01824 USA Tel.: +1 978 367-5600 Fax: +1 978 367-5700
SPFTB8115.8AN © 2012 EXFO Electro-Optical Engineering Inc. All rights reserved. Printed in Canada 12/02
ORDERING INFORMATION
gEnERAl SPEciFicATionS
Model
Test options
SONET = SONET-BASE-SW
SDH = SDH-BASE-SW
SONET-SDH = Option for combined
SONET/SDH
functionality
FTB-8115- XX - XX - XX - XX
SPEciFicATionS
Rate options a
155 = 155 Mbit/s (OC-3/STM-1) c
622 = 622 Mbit/s (OC-12/STM-4)
2.5G = 2.5 Gbit/s (OC-48/STM-16)
FTB-8115
Weight (without transceiver) 0.9 kg (2.0 lb)
Size (H x W x D) 96 mm x 51 mm x 288 mm
(3 3 / 4 in x 2 in x 11 3 / 8 in)
Temperature
operating 0 °C to 40 °C (32 °F to 104 °F)
storage –40 °C to 60 °C (–40 °F to 140 °F)
Example:
FTB-8115-SONET-155-622-8194-DUAL-RX
FTB-8080 Sync Analyzer
The FTB-8080 Synch Analyzer is a comprehensive test solution for telecom network synchronization assurance, monitoring and troubleshooting applications. It offers a
full range of wander and sync testing functionalities, including graphical display of TIE, MTIE and TDEV parameters, as well as comparison to ITU/ANSI/TS standards and
user-definable masks. The companion Sync View software suite allows remote data retrieval and test case setup, eliminating the need to visit test sites during prolonged
monitoring periods. The FTB-8080 can be used in conjunction with the FTB-8105, FTB-8115 and/or FTB-8120/8130 modules to provide wander measurements up to
OC-192/STM-64 rates.
For more information on the FTB-8080, please refer to its detailed product specification sheet at
http://documents.EXFO.com/specsheets/FTB-8080-ang.pdf
FTB-8120/8130 Transport Blazer Next-Generation SONET/SDH Test Modules
The FTB-8120 (2.5/2.7 Gbit/s) and FTB-8130 (10/10.7 Gbit/s) Transport Blazer test modules combine advanced DSn/PDH, SONET/SDH, next-generation SONET/
SDH and optical transport network (OTN) test functions, eliminating the need for multiple purpose-built test platforms when commissioning or troubleshooting SONET/
SDH, OTN and new data-aware SONET/SDH circuits. These modules offer DS0/E0 to OC-192/STM-64 testing in a single unit, and they perform Ethernet-over-SONET/
SDH (EoS) testing via optional support for GFP, VCAT and LCAS. Thanks to the SmartMode functionality, they also enable signal structure discovery for rates of up to
10 Gbit/s, with simultaneous monitoring of all discovered STS/AU and user selected VT/TU channels.
For details on the FTB-8120/8130 modules, please refer to the detailed product specification sheet at
http://documents.EXFO.com/specsheets/FTB-8120-8130-ang.pdf
complementary Products
Options a
G.747 b
DS1-FDL
DS3-FEAC
DUAL-RX
TCM
= Tandem connection monitoring
SMART_MODE
Test options
00 = Without SFP modules
8190 = SFP modules 155 Mbit/s to 2.7 Gbit/s at 1310 nm, 15 km
8191 = SFP modules 155 Mbit/s to 2.7 Gbit/s at 1310 nm, 40 km
8192 = SFP modules 155 Mbit/s to 2.7 Gbit/s at 1550 nm, 80 km
8193 = SFP modules 155 Mbit/s to 2.7 Gbit/s at 1550 nm, 40 km
8194 = SFP modules 155/622 Mbit/s at 1310 nm, 15 km d
8195 = SFP modules 155/622 Mbit/s at 1310 nm, 40 km d
8196 = SFP modules 155/622 Mbit/s at 1550 nm, 80 km d
Notes
a. Multiple options can be purchased to suit the required test application.
b. Enables E1/2M in DS3/45M analysis and generation, as per ITU-T G.747
recommendation.
c. Always included.
d. Not available with 2.5 Gbit/s.
FTB-8115
SONET/SDH 155 Mbit/s, 622 Mbit/s and 2.5 Gbit/s
Analyzer module supporting up to OC-48/STM-16 optical
rates, as well as electrical DSn/PDH interfaces
Test Interfaces
SONET: STS-1e, STS-3e, OC-3, OC-12, OC-48
SDH: STM-0e, STM-1e, STM-1, STM-4, STM-16
DSn: DS1, DS3, Dual DS1 Rx, Dual DS3 Rx
PDH: E1, E2, E3, E4